Now showing items 28-47 of 153

    • Design & simulation of silicon-based magnetic sensor 

      Nor Azlan, Mohamed (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      In this thesis, the design and simulation of Silicon-Based Magnetic sensor is discussed. The transistor can be converting into a magnetic sensor by splitting drain structure of the conventional MOS transistor into two ...
    • Design a current mirror using body driven technique 

      Siti Zawana Abdul Rani (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Current mirror or current source is a one of the key elements in analog circuit design. For high performance analog circuit applications, the accuracy and output impedance are the most important parameters to determine the ...
    • Design a Wideband Low-Noise Amplifier for Wireless Communication using 0.35-µm CMOS Technology 

      Mohd Hafiz Abu (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      Low Noise Amplifier (LNA) is one of the receiver front end component. Place near antenna, this part used to minimize the noise figure of the amplifier while providing enough gain with sufficient linearity to overcome the ...
    • Design and analysis CMOS Cascode amplifier 

      Che Mohd Amirul Azam Che Mohd Ghani (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)
      The design of CMOS cascode amplier is presented which it will constructed with the circuit of current mirror and two transistor are placed in cascode topology. The design need to achieve the value that will meet the ...
    • Design and analysis of a digital signal processing for biomedical application system 

      Ch’ng, Ei Peng (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-05)
      This paper consist of two major part, which is software and hardware design. The hardware part is to design a heart beat sensor by using the photo transistor to detect the human blood. The software part consists of ...
    • Design and analysis of a sensor interface circuit 

      Ahmad Samier Farhan, Suhaimi (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-04)
      The theory and design of a sensor interface circuit for capacitive sensor is presented. The design used the switch capacitor technique with combination of operational transconductance amplifier (OTA). This technique will ...
    • Design and analysis of a video motion predictor 

      Lai, Yoong Yee (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-04)
      21st century has experienced a vast range of video application, from internet streaming to HDTV broadcasting. However, video data consumes a large amount of storage capacity and require high bandwidth to transfer wirelessly. ...
    • Design and analysis of a wireless temperature monitoring system 

      Teoh, Wei Boon (Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011-06)
      Wireless temperature monitoring system for industrial application is widely used in nowadays. Radio Frequency (RF) is the frequency of radio waves and alternating currents which carry radio signals. The radio frequency ...
    • Design and analysis of Floating Point divider 

      Siti Aminah Hussen (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      As the advances of VLSI technology, low power design has become an important topic in VLSI design. Scaling down supply voltage is an effective way for power reduction because of its quadratic relationship to dynamic power. ...
    • Design and analysis of Floating Point multiplier 

      Zariah Asari (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      The most important floating-point representation is defined in IEEE Standard 754, adopted in 1985. This standard was developed to facilitate the portability of programs from one processor to another and to encourage the ...
    • Design and analysis of low power using Sleepy Stack and Zig-Zag technique 

      Wan Nurul Liyana Wan Zulkefle (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Now days the design of CMOS becomes greater where the number of transistor in design increased largely. However there are some problem that occurs during the excellent design and the increasing of transistor where the ...
    • Design and analysis of Three-Axis Piezoresistive accelerometer 

      Suraya Abdullah (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Recently, micro-electromechanical system (MEMS) technologies have been used to manufacturer accelerometers. MEMS sensors include tranducers elements and the necessary signal conditioning electronics integrated together ...
    • Design and implementation of 3 Axis Magnetic Field Meter 

      Chin Paik Leang (Universiti Malaysia PerlisSchool Of Microelectronic Engineering, 2008-04)
      Magnetic field meter, (sometimes referred to as an magnetic field detector) is a scientific instrument for measuring magnetic field radiation. This project is to construct the three axis portable magnetic field meter. The ...
    • Design and implementation of 3 Axis Magnetic Field Meter 

      Chong Wei Keat (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Electromagnetic Field Meter (sometime referred to as an Electromagnetic Field Detector) is a scientific instrument for measuring electromagnetic radiation. The electromagnetic radiation is a physical field produced by ...
    • Design and implementation of a Music Box using FPGA 

      Tan Kian Yiak (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-03)
      A design and implementation of music box using FPGA is presented in this report. FPGA is a digital logic chip that can be programmed to do almost any digital function. An effort has been carried out to make the FPGA to ...
    • Design and Implementation of a VGA Display Generator Using FPGA 

      Haslinda, Hassan (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      This project is an implementation of a VGA display generator, using FPGA device. The goal of this project is to design a simple video image. The image is a square ball shape in red color that bounces up and down the ...
    • Design and realization of a high Speed Multiplier Accumulator (MAC) unit for low power applications 

      Mohd Nazri Md Rejab (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      A fast and energy-efficient multiplier is always needed in electronics industry especially DSP, image processing and arithmetic units in microprocessors. Multiplier is such an important element which contributes substantially ...
    • Design and simulation of Piezoresistive pressure sensor 

      Mohd Hilmi Mohd Nor (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)
      The piezoresistive effect describes the changing electrical resistance of a material due to applied mechanical stress. Electrical resistor will change its resistance when it experiences a strain and deformation. Pressure ...
    • Design and Simulation of CMOS Operational Amplifier using Mentor Graphics Tool 

      Jegatheesan Sri Ramalu (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2007-04)
      Today’s atmosphere and demands continue to drive operating voltages down, especially for widely used components such as the Operational Amplifier. Some of the motivations driving the market are integration, battery operated ...
    • Design and simulation of Gallium Arsenide based Schottky diodes for RF applications 

      Ong Chee Meng (Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)
      Today, being the dawn of a new RF technology wave, the requirement of making semiconductor device which have greater speed in performance, which is realized either as a higher maximum frequency of operation or higher logic ...