Search
Now showing items 81-90 of 114
Properties and characterization of cerber mangas (sea mango) filled poly (vinyl alcohol) biocomposite films
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This research was focused on the effect of sea mango fiber (SMF) content and chemical
modification on tensile and thermal properties, morphology and moisture content of poly(vinyl alcohol) (PVA)/sea mango fiber (SMF) ...
Influence of surface treatment on the properties of high density polyethylene composites filled with palm kernel shell
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The high density polyethylene (HDPE) composites filled with palm kernel shell
(PKS) were prepared using Z-blade mixer at processing temperature 190 ˚C and rotor
speed 30 rpm. The effect of filler loading of PKS on ...
Mechanical studie of chitosan filled recycled low density polyethylene biocomposites
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The chitosan filled recycled low density polyethylene (rLDPE) biocomposites were
prepared by Z-blade mixer at the temperature 180 °C. The effects of chitosan loading on
mechanical properties of the rLDPE/chitosan ...
Effect of solution treatment temperature on the microstructure of Fe-40Ni-24Cr alloy
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The research study describes the effect of solution treatment temperature on
the microstructure of Fe-40Ni-24Cr alloy. The working process is divided into three
(3) working phases which are solution treatment process, ...
The thermal properties of aluminium hydroxide as filler in recycled PP composite
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This study is about the composite of recycled polypropylene (RPP) composites filled with
aluminium hydroxide (Al(OH)3) . Maleic anhydride-grafted polypropylene (MAPP) was
also used as compatibilizer between filler and ...
Solid electrolyte for solid stat rechargeable lithium ion
(Universiti Malaysia Perlis (UniMAP), 2016)
Solid electrolyte for solid state rechargeable Lithium ion battery by using Li6Zr2O7 as one new element that could contribute better life cycle to the lithium ion battery. It is focus on two major categories: crystalline ...
Thermoplastic starch composite incorporating hybrid cellulose/bentonite filler
(Universiti Malaysia Perlis (UniMAP), 2016)
The aim of this project is to prepare the biocomposite TPS films. The composite films were prepared by casting method. In this project, TPS biocomposites containing various ratios of cellulose/bentonite fillers were produced, ...
The effect of different particle size of steel slag as filler in concrete
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Manufacturing of Ordinary Portland Cement(OPC) will produces high consumption of energy and carbon dioxide emission. This study is to produce a concrete that uses steel slag as cement replacement. 20% of steel slag and 80% ...
Preparation & characterization of CUO/SIO₂ nanocomposite aerogel
(Universiti Malaysia Perlis (UniMAP), 2016-05)
CuO/SiO₂ nanocomposite aerogels were prepared by using tetraethyl orthosilicate (TEOS) as Si source, and aqueous solution of CuO as the precursors via sol-gel process and special drying techniques must be applied to replace ...
Properties of Chitosan/Halloysite nanotubes composites films
(Universiti Malaysia Perlis (UniMAP), 2016-06)