Search
Now showing items 31-40 of 114
Surface modification of low carbon steel and alloy steel by boriding diffusion coating
(Universiti Malaysia Perlis (UniMAP), 2016-06)
In this study, Inconel 718 and mild steel rods with diameter 20 mm were undergo boriding diffusion coating by using pack cementation method at 900°C for 30,
60 and 90 minutes. This surface modification was conducted to ...
Synthesis of molecular imprinting polymer (MIP) heparin
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This project is about the synthesis of molecular imprinted polymer (MIP) Heparin. From the previous studies, it has been discover that the heparin produced is not user-friendly and do not leads to green environment. So in ...
The anodizing of sintered Mg/Ca alloys
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This project is focusing on the effect of anodizing on the sintered Mg/Ca alloys.
The Mg/Ca alloy was fabricated using powder metallurgy method. The Mg powder was
mixed with 1 wt.% Ca powder using rotating mill with ball ...
A study on the effect of temperature on morphology of precipitate dolomite
(Universiti Malaysia Perlis (UniMAP), 2016-05)
The main objective of this project is to study the effect of temperature on morphology of precipitate calcium magnesium carbonate. This examine involves the utility of different temperature for carbonation process as a way ...
Cathode materials for high energy density rechargeable lithium-ion batteris
(Universiti Malaysia Perlis (UniMAP), 2016-05)
In this project, the Li2MnO3 cathode material is synthesis using solid-state reaction. The
characterization is done by using X-ray diffraction (XRD), Scanning electron microscope (SEM) and Thermogravimetric analysis (TGA). ...
Titled optimisation of anodising parameter with oxalic acid for the formation of anodic aluminium oxide
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This thesis discussed on the optimisation of anodizing parameter with oxalic
acid for the formation of anodic aluminium oxide (AAO) by using Taguchi Methods.
During one-step of anodization technique is performed, porous ...
The effects of coconut husk fiber versus coconut shell powder in thermoplastic polyurethane (TPU) composites
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Thermoplastic polyurethane (TPU) is one of the thermoplastic where can be enhanced the
characteristics by adding filler. TPU have been used in a wide variety of industries fields.
This research describes the effect of ...
The study of mechanical and thermoelectric properties of nickel zinc ferrite
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This research is conduct to study mechanical and properties of Nickel Zinc Ferrite
NiZnOFe₂O₄ as the reinforcement filler to improve the mechanical and thermoelectric
properties of polyester to produce thermoelectric ...
Thermal properties of biocomposites based on sea mango fibers
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The effect of sea mango (SM) filler loading and the effect of amount used of polypropylene-graft-maleic anhydride (PP-g-MA) added as a compatibilizer on thermal properties and flow behavior of biocomposites were studied. ...
Studied on the mechanically activated and thermally treated dolomite for adsorption application
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Dolomite from Chuping, Perlis was mechanically activated at different parameters of planetary milling (ball:powder ratio, miiling time and revolution speed) and thermally treated within temperature range 600-1000 °C. The ...