Browsing School of Materials Engineering (FYP) by Subject "Materials engineering"
Now showing items 1-20 of 32
-
Agricultural residues as Precursors for activated carbon production (coconut waste)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Coconut meal and coconut shell were characterized to know the suitability to become the activated carbon precursors. Besides the low cost and decrease the market waste, this attempt was made to produce an alternative ... -
Agricultural residues as Precursors for activated carbon production (rice husk)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Rice husk because of low cost raw material and it activated form can be used as carbon precursor as a solution to reduce the agricultural waste. An effort was made to produce an activated carbon precursor from the rice ... -
Analysis of binary aluminium tin products with varying compositions and optimum flowability, tensile strength and hardness
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Aluminium tin forms have applications in automobiles and electronic industries. The demand for these materials has been growing at a fast pace from several decades. It is therefore desirable that these materials are produced ... -
The anodizing of sintered Mg/Ca alloys
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This project is focusing on the effect of anodizing on the sintered Mg/Ca alloys. The Mg/Ca alloy was fabricated using powder metallurgy method. The Mg powder was mixed with 1 wt.% Ca powder using rotating mill with ball ... -
Beneficiation and extraction of Malaysian's iron ores
(Universiti Malaysia Perlis (UniMAP)School of Material Engineering, 2016-06)This present study is to study the influence of the different sizes of iron ore from Bukit Besi, Terengganu and Kulim, Kedah on the reduction process with coke from Perwaja Steel, Kemaman, Terengganu as a reducing agent. ... -
Characterization of Dolomite and its suitability as a raw material for soap production
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study is about characterization and soap production by using dolomite as a raw material. Calcium hydroxide and magnesium hydroxide also have been used in this study as a raw material. Soap are made from fats and oil ... -
Conductive coating strategy for Magnesium alloy as a surface protection and reliability
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008)The methods and technologies in various coatings for magnesium alloys are studied. The magnesium alloy used in this final year project is AZ91D, which is still in very early using stages in semiconductor industry. This ... -
Controlling the synthesis parameter during Fe(OH)₂ precipitation for goethite formation
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)Iron oxide were synthesized goethite free of magnetic impurities with different crystal sizes in different molar ratio and mixing time through the reverse precipitation of FeSO₄∙7H₂O and NaOH. Mostly goethite mineral ... -
Corrosion properties of Stainless steel
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Chromium content in austenitic stainless steel 304 and 316L can increase the resistance to pitting corrosion through the formation of passive layer on the surface of metal. The corrosion properties of these stainless ... -
Dynamic vulcanization of waste paper filled of low density polyethylene (LDPE)/ ethylene propylene diene terpolymer (EPDM) composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of filler loading and dynamic vulcanization of paper sludge (PS) filled LDPE/EPDM was investigated. Blends with different filler loading ranging from 0 to 60 wt % were prepared in Z-blade mixer at 180 °C and a ... -
The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The aim of this research is to study the effect of cooling condition on microstructure and properties of Al alloy. Powder compacts from a premixed commercial aluminium powder Al-4.4Cu-0.8Si-0.5Mg (wt %) grade have been ... -
Effect of high temperature exposure on Kaolin geopolymer
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The geopolymer material is a green material which produce less emission of CO2 and less energy consuming material compare to Portland Cement (PC) materials. An experimental study the effect of high temperature exposure ... -
Effect of particle size and milling process on the microstructure and thermal properties of Copper Silicon Carbide (CuSiC) composites for electronic packing application
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Shrinking size and increasing functionality of IC device has induced serious thermal problem. Good thermal dissipation, light weight and easy-to-process material, such as CuSiC, is a highly potential heat spreader material ... -
Effect of Poly(Acrylic acid) on mechanical, morphology properties, X-Ray diffraction and water absorption of Nanoclay filled low density Polyethylene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effects of poly(acrylic acid) (PAA) of nanoclay filled low density polyethylene (LDPE) composite on mechanical and characterization were studied using Universal Testing Machine (UTM), X-ray diffraction (XRD), Scanning ... -
The effect of sintering temperature on mechanical properties of natural and synthetic Hydroxyapatite with Alumina (1%) as an additive
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)A multi sintering temperature of hydroxyapatite (HA) will give an affect not only for the shape, composition and arrangement of the microstructure, but also to a high impact on mechanical properties of those samples. Natural ... -
Effect of solution treatment temperature on the microstructure of Fe-40Ni-24Cr alloy
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The research study describes the effect of solution treatment temperature on the microstructure of Fe-40Ni-24Cr alloy. The working process is divided into three (3) working phases which are solution treatment process, ... -
Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Aluminium-silicon-magnesium is usually applied in automotive industry such as in block engine. The main objective of this project is to study the changes in microstructure, hardness and the thermal analysis curve after ... -
Establishment of material selection and design consideration for bulletproof vest
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)A bulletproof vest is a protective clothing that is worn on the body of the wearer. Basically a bulletproof vest is used to absorb or disperse the impact and reduce or prevent the penetration of projectiles and shrapnel ... -
Influence of H2 SO4 solution on formation of porous AAO thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The fabrication of self-ordered anodic aluminum oxide (AAO) by anodization of Al foils and pure aluminum in sulfuric acid solution was investigated. The influences of anodizing variables, such as applied voltage, the ... -
Lattice Imperfections in Intermetallic Ti-Al alloys: an X-Ray Diffraction study of the microstructure by the Rietveld method
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)Microstructure in intermetallic Ti-Al alloys with compositions of Al= 45, 50, 55, and 60% in the homogenized bulk states has been extensively studied using Rietveld whole X-ray profile fitting technique, adopting the ...