Browsing School of Materials Engineering (FYP) by Subject "Anodizing"
Now showing items 1-4 of 4
-
The anodizing of sintered Mg/Ca alloys
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This project is focusing on the effect of anodizing on the sintered Mg/Ca alloys. The Mg/Ca alloy was fabricated using powder metallurgy method. The Mg powder was mixed with 1 wt.% Ca powder using rotating mill with ball ... -
Effect of ratio of ethylene glycol to water and concentration of ammonium fluoride on synthesis of Cu2O nanostructures
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2015-11)Cuprous oxide (Cu₂O) nanostructures have been synthesized via anodizing process in ethylene glycol electrolyte with different water content and concentration ofNH4F. The effects water content in ethylene glycol electrolyte ... -
Effect of temperature of electrolyte and anodizing voltage on the synthesis of CU₂O nanostructures by anodizing
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Nanostructured cuprous oxide were grown by the process of anodization of copper plate in the electrolyte of ethylene glycol mixed 0.15M KOH + 0.1M NH4F + 3% H₂O for 300 second under varying the conditions including anodizing ... -
Titled optimisation of anodising parameter with oxalic acid for the formation of anodic aluminium oxide
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This thesis discussed on the optimisation of anodizing parameter with oxalic acid for the formation of anodic aluminium oxide (AAO) by using Taguchi Methods. During one-step of anodization technique is performed, porous ...