Browsing School of Materials Engineering (FYP) by Issue Date
Now showing items 21-40 of 256
-
Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The present study was undertaken to investigate the effect of metallurgical parameters on the hardness, microstructural characterization and porosity of heat-treated 319 alloys, with the aim of adjusting these parameters ... -
Preparation and properties of HDPE composites reinforced with treated bagasse fiber
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Composites of baggase fiber and High Density Polyethylene (HDPE) were investigated. The increases in filler loading have increased the value of tensile strength, flexural strength, modulus of elasticity, flexural strength ... -
The fabrication of porcelain ceramic via Wet casting technique
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Porcelain ceramic which composed of ball clay, kaolin, silica and feldspar were fabricated and investigated to study the effect of sintering temperature on mechanical properties. Two types of parameter were used in these ... -
Application of response surface methodology for Copper extraction using solid phase immobilized with Cyanex 301
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A solid phase containing Cyanex 301 was developed by using phase inversion procedure. The extraction of copper ion through this solid phase with the function of pH, weight of the solid phase and temperature were investigated ... -
The effect of alloying elements in sintered-recycle steel compaction
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effects of alloying elements in the sintered-recycle steel compaction were studied using powder metallurgy technique. High-energy milling technique was used to crush and mill the waste steel chip in the form of spiral ... -
Preparation of high purity SiO2 from Rice Husk
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A high purity silicon dioxide (97.08%) was obtained by atmosphere thermal decomposition of the acetic acid leached rice husk at 800°C for 15 minutes. Leaching process parameters such as pH of the acid solution, leaching ... -
Effect of filler loading of waste tire dust filled Acrylonitrile Butadiene Styrene composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Waste tire dust is an organic material which can be used as filler in polymer composites. Effects of filler loading of the waste tire dust filled acrylonitrile butadiene styrene composites were studied. The blend ratios ... -
Properties of pulp fiber filled high density Polyethylene
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In this study, attempt has been made to combine the advantages of fiber and polymer. Composites based on high density polyethylene (HDPE) and pulp fiber was made through melt blending and compression molding. HDPE/pulp ... -
Analysis of Binary Aluminium-Magnesium products with varying composition and optimum flowability, tensile strength and hardness
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Casting is a process that can produce a complex and complicated component. This final year project is to investigate how far the influence on mechanical properties and microstructure of varying aluminium-magnesium alloy ... -
A study case of dissimilar welding between mild steel ( Low Carbon Steel ) and stainless steel on hardness vickers and tensile shear test for gas tungsten arc welding ( GTAW )
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of the dissimilar weld joint design, edge preparation and joint dimension on the weldability of Gas Tungsten Arc Welding ( GTAW ) between mild steel and stainless ... -
Building of composite system for Wing using Prepreg
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of fibre reinforcement and resin content on moisture uptake in composite laminate was investigated. Three materials using identical epoxy resin systems but different reinforcements glass, kevlar and carbon ... -
A study of using grass (Malaysian foxtail) fiber in paper making
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)A various types of grasses can be found in Malaysia. A few of grass can be used for animal food and as a covering the earth only. More than that, grasses always abandoned or fired. Foxtail grass, also known as ‘rumput bulu’ ... -
Effect of Ethylene Diamine-co-Acrylic acid (EDAA) on properties of Acrylonitrile Butadiene styrene/Waste tyre dust composites (ABS/WTD)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Effect of coupling agent of ethylene diamine -co- and acrylic acid (EDAA) on properties of waste tyre dust ( WTD ) filled acrylonitrile butadiene stryene has been investigated. The investigation are including on the tensile ... -
Characterization and chemical oxidation of Nanoclay filled low density Polyethylene (LDPE) composites: the effect of Poly (acrylic acid)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effects of poly(acrylic acid) (PAA) on the characterization and chemical oxidation of low density polyethylene (LDPE) and nanoclay were studied with a Differential scanning calorimetriy (DSC), Thermalgravimetry analysis ... -
Effect of solution treatment on magnesium sacrificial anode
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The main objective of this study is to determine the effect of solution treatment period on the corrosion behavior of magnesium anode. Commercial high potential magnesium anode was heat-treated at 3000C for 3, 6 and 9 hours ... -
Analyze the quality of Tin-Aluminium binary alloy products concerning of its flowability, tensile strength, and hardness using various types of moulds
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Tin-aluminium binary alloy is a type of alloy that improve the strength properties of tin. As we know, tin is a type of metal that randomly used in constructive application. So, combined with aluminium, a new type of alloy ... -
The study on Ultra-fine WC-6 wt.%Co for producing cutting tool inserts
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)WC–Co cutting tools insert can be manufactured by controlling liquid phase migration or liquid redistribution during liquid phase sintering. In this study, the effect of temperature on mechanical properties has been studied. ... -
Study on the effect of reinforcement particle size parameter on Aluminum metal matrix composite reinforced with Alumina particles
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The physical and mechanical properties of different particle sizes of alumina reinforce in aluminum metal matrix composite were investigated. In general, P/M aluminum matrix composites exhibit good levels of mechanical ... -
The effect of welding current on mechanical properties of Galvanized steel sheets in resistance spot welding (RSW)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This study about the effect of welding current and the cycles on the quality of weld joint on galvanized steel sheets using resistance spot welding. Examinations involve tensile shear and tensile peel strength (T-peel test) ... -
A study of microstructure and mechanical properties of copper filled Polypropylene and copper filled Epoxy
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In this project, metal filled polymer composite had been produced by using powder metallurgy concept and cold pressing method. The processing method had influenced the properties of composite system and to establish the ...