Browsing School of Materials Engineering (FYP) by Title

Now showing items 166-185 of 256

    • Preparation of high purity SiO2 from Rice Husk 

      Mohd Razif Mohd Shariff (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      A high purity silicon dioxide (97.08%) was obtained by atmosphere thermal decomposition of the acetic acid leached rice husk at 800°C for 15 minutes. Leaching process parameters such as pH of the acid solution, leaching ...

    • Preparation of Photoresponse n-TiO2 for hydrogen and oxygen evolution reactions in an electrochemical cell 

      Kow Wei Khen (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)
      Today, energy crisis triggered by depletion and pollution aspect of fossil fuels, has urged the need to search of clean and renewable energy, which can effectively substitute petroleum. The use of hydrogen as an environmentally ...

    • Preparation of rice straw-waste tire dust composite board 

      Muhammad Syafiq Azmi (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      In this study agricultural lignocelluloses fiber (rice straw) and waste tire dust composite board were prepared using the method use in the wood-based panel industry. The manufacturing parameters were density (0.66g/cm3, ...

    • Preparation of Solid Phase material containing Cyanex 302 for extraction of antimony 

      Mohd Redzuan Ramli (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)
      This project aim to study the characteristic of novel solid phase material which developed using Polymer Inclusion Membrane (PIM) preparation technique and the effect of ariables such as temperature, weight of solid phase ...

    • Preparations of effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr 

      Siti Aisyah, Che Sakdun (Universiti Malaysia Perlis (UniMAP), 2017)
      The effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr alloy were investigated at temperature 850°C for 150 hours. The samples of Fe-33Ni-19Cr was given in a square plate shape was undergone heat treatment ...

    • The process of electroplating in presence of Nickel Salts 

      Mohd Saiful Khairuddin Azahar (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      Electroplating process has been carried out by utilising the Watt’s Bath without brighteners. Plots of weight change of electrodes versus current density shows that weight loss of anodes and weight of deposits on cathodes ...

    • The processing of pegmatite feldspar and extraction of feldspar and silica 

      Nor'Ain, Yusah (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      The task given is to process the pegmatite ore and to extract the minerals from the ore independently that is taken from Bukit Mor, Muar, Johor. The first step is to crush the pegmatite ore using jaw and cone crusher ...

    • Production and characterization of epoxy syntactic foam filled epoxy sphere 

      Munzier, Sahari (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      The primary aim of this research is to identify the properties of the epoxy syntactic foam (ESF) and the physical factor that will alter their properties. The Epoxy Syntactic Foam (ESF) that were used in this study was ESF ...

    • The production of fly ash aggregates 

      Nur Amalina Ahmad (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-03)
      This aim of study is to characterize the physical properties manufactured aggregates that produces from waste, which is fly ash. In this study an attempt has been made to find the suitability of the fly ash waste and ...

    • The production of paper from sugarcane bagasse 

      Ahmad Nurhilmi, Abdul Gani (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      The paper industry worldwide always faced a problem on lack of raw material due to deforestation. The agriculture waste material can be an alternative raw material to produce paper. For this study, sugarcane bagasse was ...

    • Production of particle board from banana leaves 

      Wan Suhardi Wan Md. Sukri (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-06)
      The method of agricultural waste disposal involving open burning which often to be used by the banana plantations entrepreneur is unpractical where it is contribute to air pollution. Base on the situation above, this study ...

    • Production of particle board from sugarcane bagasse 

      Mohd Zamri Abdullah (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      Particle board has been used widely in the furniture industry nowadays. In this study, the production of particle board from sugarcane bagasse is to reduce the waste of bagasse and air pollution. This study produced by ...

    • Properties and characterization of cerber mangas (sea mango) filled poly (vinyl alcohol) biocomposite films 

      Siti Saodah, Ismi Hissan (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)
      This research was focused on the effect of sea mango fiber (SMF) content and chemical modification on tensile and thermal properties, morphology and moisture content of poly(vinyl alcohol) (PVA)/sea mango fiber (SMF) ...

    • The properties and photocatalytic behaviour of TiO₂ and ZnO particles after modification with PVP and Ag nanoparticles 

      Mohd Faidhiradhi, Mohd Fazuki (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      The commercialized zinc oxide (ZnO) and titania (TiO₂) powders are modified with polyvinylpyrrolidone (PVP) and silver (Ag) nanoparticles. The modification process is done via a simple wet chemistry method. The effect of ...

    • Properties of carbon nanotubes and calcium carbonate filled polymer composites 

      Noor Azwa, Mohd Noor (Universiti Malaysia Perlis (UniMAP)Scholl of Materials Engineering, 2016-05)
      This project was focused on the fabrication and characterization of CNTs-CaCO3 filled epoxy composites. The polymer composites were prepared with different ratio of filler loading by using a mechanical stirrer with speed ...

    • Properties of Chitosan/Halloysite nanotubes composites films 

      Syahira Adila, Mat Sulaiman (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)

    • Properties of CNTs/Calcium Carbonate filled polymer composites 

      Siti Maisarah, Suhaimi (Universiti Malaysia Perlis (UniMAP), 2017-06)
      In the present work, the properties of the synthesized hybrid carbon nanotube-calcium carbonate (CNTs-CaCO3), prepared via chemical vapor deposition and a physically mixed CNTs-CaCO3 filled epoxy composites, at various ...

    • Properties of oil palm flour filled Polypropylene composites 

      Mazlinda Moin (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)
      Composites of thermoplastic blend of polypropylene (PP) filled with oil palm flour (OPF) was prepared by Z-Blade Mixer at 180 ºC and rotor speed 50 rpm. In general, increased of oil palm flour loading have increasing Young’s ...

    • Properties of pulp fiber filled high density Polyethylene 

      Azmel Hakim, Zainol Abidin (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      In this study, attempt has been made to combine the advantages of fiber and polymer. Composites based on high density polyethylene (HDPE) and pulp fiber was made through melt blending and compression molding. HDPE/pulp ...

    • The protection coverage of external galvanic cell in series and parallel connection on a buried structure 

      Rubhakumaran, Ramachandran (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)
      Corrosion is an electrochemical process where surface of a material is being destroyed via its interaction with the environment. Buried structure like pipelines or undergroundtank experiences corrosion when the surface ...