Browsing School of Materials Engineering (FYP) by Title
Now showing items 191-210 of 256
-
Silica extraction from agricultural waste as corrosion inhibitor
(Universiti Malaysia Perlis (UniMAP), 2016-06)Rice husk and rice straw are found abundant as by-product of the the rice milling industry. Both of the agricultural wastes have a great potential to be used as raw material in industry. Rice husk and rice straw normally ... -
Silver coated immobilized PANI/TiO₂ by using photo-oxidation method
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016)This study describes ability of silver coated immobilized PANI/TiO₂ by using photooxidation method in the waste water treatment through the photocatalytic degradation process. The polyaniline soluble is prepared by ... -
Sintering atmosphere effect on Al-0.2Mg alloy
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The effect of sintering atmosphere on mechanical properties and microstructure of Al-0.2Mg alloy were investigated. In this study, one type of parameter were used that was; different sintering atmosphere. Al and Mg were ... -
Sintering behavior and microstructural characterization of Aluminium copper powder compacts (Al- 4.4 Cu-0.8 Si-0.5 Mg Wt% ) alloy prepared by powder metallurgy
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)Powder Metallurgy (P/M) is a near net shape metal forming techniques used to manufacture part to close tolerance. In this research, aluminium copper alloy (Al-4.4%Cu- 0.8% Si-0.5%Mg) is prepared by using P/M method. In ... -
Solid electrolyte for intermediate temperature solid Oxide fuel cell
(Universiti Malaysia Perlis (UniMAP), 2020-06)Solid oxide fuel cell (SOFCs) have potential to generate high efficiency electrical energy converted from chemical energy with minimum impact to the environment. This thesis were aimed to study the structure and electrical ... -
Solid electrolyte for intermediate temperature solid oxide fuel cells (IT-SOFCs)
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)The project involved in the making of the intermediate temperature solid oxide fuel cell by several compositions. The project has started with La0.₂Sr0.₂5Ca0.₄₅TiO₃ as a parent composition. However, the author try to ... -
Solid electrolyte for solid stat rechargeable lithium ion
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016)Solid electrolyte for solid state rechargeable Lithium ion battery by using Li6Zr2O7 as one new element that could contribute better life cycle to the lithium ion battery. It is focus on two major categories: crystalline ... -
Speech compression based on LPC method
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Speech processing is currently a key focus for many researchers in the area of Digital Signal Processing. This project is focus on the topic of voice conversion, which involves producing the speech compression. The aim ... -
Studied on the mechanically activated and thermally treated dolomite for adsorption application
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)Dolomite from Chuping, Perlis was mechanically activated at different parameters of planetary milling (ball:powder ratio, miiling time and revolution speed) and thermally treated within temperature range 600-1000 °C. The ... -
Studies of blends of natural rubber and styrene-butadiene rubber/citronella fibre composite: the effect of physico-mechanical properties and morphology
(Universiti Malaysia Perlis (UniMAP), 2017-06)Rubber composite filled with citronella fibre (CF) was prepared using two roll mill machine. The citronella fibre were undergone alkaline treatment before proceed to compound. Different ratio of filler were prepared with ... -
Studies on non-halogen flame retardant with low density polyethylene (LDPE) composites
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Low density polyethylene (LDPE) was prepared with added non-halogen flame retardant and synergy. Blends with separate by four recipe in loading ranging from 0 to 60 wt % were prepared in Z blade mixer at 200°C and a motor ... -
A study case of dissimilar welding between mild steel ( Low Carbon Steel ) and stainless steel on hardness vickers and tensile shear test for gas tungsten arc welding ( GTAW )
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)This report is about the experimental study on the effects of the dissimilar weld joint design, edge preparation and joint dimension on the weldability of Gas Tungsten Arc Welding ( GTAW ) between mild steel and stainless ... -
Study of concentration of reaction gas on the synthesis of graphene
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This research is focused on the effect of concentration of reaction gas to the quality and quantity of the synthesis of graphene. Different concentrations of reaction gas (methane, CH4) were used at the range of 130 MLPM ... -
Study of erosion corrosion in oil and gas industry
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)This project is about study of the erosion corrosion in oil and gas industries based on the samples from Petronas Gas Processing Plant. The microstructure and hardness analysis was done to the sample ASTM A 105 Carbon ... -
Study of fabrication Al-Tin slag composite by powder metallurgy method
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-05)In the present investigation, Aluminum-tin slag composite have been produced by powder metallurgy (P/M) route. Aluminum (Al) and tin slag were undergo milling and sieving process where particle size <75 µm and <63 µm for ... -
The study of flame retardant non-halogen in High Density Polyethylene (HDPE)
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The main objective of this study to investigate the effects of non-halogen flame retardant in high density polyethylene (HDPE) and observe their ignition properties. High density polyethylene (HDPE) was prepared with added ... -
A study of hardcoat anodizing on PM Al-Mg composite
(University Malaysia PerlisSchool of Materials Engineering, 2008-05)This research is being conducted to investigate an effect occurring on anodizing process on powder metallurgy Aluminium-Magnesium (PM Al-Mg) composite. Composite materials are fabricated by using powder metallurgy method ... -
A study of Kaolin as partial replacement in producing concrete brick
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)During the nature disaster such as Tsunami, earth quake and flooding, many houses were collapsed and need to be developed back in short time. But the requirement of construction material especially brick or block in one ... -
The study of mechanical and thermoelectric properties of nickel zinc ferrite
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This research is conduct to study mechanical and properties of Nickel Zinc Ferrite NiZnOFe₂O₄ as the reinforcement filler to improve the mechanical and thermoelectric properties of polyester to produce thermoelectric ... -
A study of microstructure and mechanical properties of copper filled Polypropylene and copper filled Epoxy
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)In this project, metal filled polymer composite had been produced by using powder metallurgy concept and cold pressing method. The processing method had influenced the properties of composite system and to establish the ...