Search
Now showing items 1-10 of 142
Analysis of strength on thick plate part using Taguchi Method
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The tensile strength of the certain moulded parts is important, especially for the product which requires the strength for functionality and quality. It is known that parameter setting of injection moulding had interaction ...
Experiment study of Droplet Evaporation Boiling Curve using Aluminium
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This experiment is about study of the water droplet evaporation boiling curve using aluminium. Boiling is the most familiar form of heat transfer. Boiling takes different forms, depending on the value of the temperature. ...
Ergonomics Intervention on Manual Handling at strider area in an Aircraft Manufacturing Company
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This main objective of the project is to solve ergonomics issues on manual handling roll materials at Strider Area of Aerospace Composites Malaysia Sdn Bhd. The workers from Strider Area need to handle heavy roll materials ...
Energetic analysis on AP-X process for liquefaction of natural gas using open source software
(Universiti Malaysia Perlis (UniMAP), 2016-06)
The main objective of this thesis is to model a single mixed refrigerant process for offshore natural gas liquefaction using DWSIM as a simulation tools. Liquefied Natural Gas (LNG) in the energy sector is seen as a realistic ...
Optimization parameter effects on the quality surface finish of the three-dimensional printing (3D printing) Fused Deposition Modelling (FDM) process
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Fused deposition modelling (FDM) is a process for developing rapid prototype (RP) objects
according to numerically defined cross sectional geometry by depositing fused layers of
material. This RP may used straight to the ...
Development of Graphical User Interface (GUI) in application of productivity rate for rotor arrangement with parallel action automated flow line
(Universiti Malaysia Perlis (UniMAP), 2016-06)
In the application in industry, productivity rate can be calculated with the mathematical model of the automated flow line. Automated flow lines are universal and widely used in industry which can be either in a linear ...
Analysis of shrinkage on the thick plate part using Response Surface Methodology (RSM)
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This study is about research on the analysis of the quality (shrinkage) on the thick
plate part using response surface methodology (RSM). The objective of this study is to
improve the quality of thick plate part by ...
Investigate mechanical properties of laminated flax fabric composite plate with different laminate code lamination
(Universiti Malaysia Perlis (UniMAP), 2016-06)
This paper studied the mechanical behaviors of laminated flax fabric composite plate
with different laminate code lamination. The aim of the study is to observe the influence
of the different angle in the specimen either ...
Hybrid microwave sintering of Fe-Cr-SiC
(Universiti Malaysia Perlis (UniMAP), 2016-06)
Silicon carbide is generally used because of their mechanical properties which are good wear, high resistance, high hardness, and durability. However, nowadays steel are hard metal and widely used in the industry. Silicon ...
Evaluated the temperature of Rangue Hilsch Vortex tube performance using Taguchi method
(Universiti Malaysia Perlis (UniMAP), 2016-05)
The output performances of vortex tube are mainly depending on the vortex tube parameters (length, diameter and angle). A study was carried out to investigate the relationship between the vortex tube parameters and the ...