Final Year Project Papers & Reports: Recent submissions
Now showing items 1161-1180 of 2200
-
Screening of soybean oil blending with waste cooking oil for biolubricant precursor
(Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-05)During recent years the interest in environment friendly and readily biodegradable lubricant based on vegetable oil has increased. So, in this study, soybean oil (SO) was blended with waste cooking oil (WCO) and three ... -
Development and fabrication of new design of latex container
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-05)The existing product of latex container have problem during raining day. The water will insert into the latex container and damage the latex. Because of that problem, the rubber tapper cannot do their work during raining day. -
Influence treatment time of lanthanum conversion coating on magnesium alloy
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-05)This final report consists of several key sections, which are: introduction, problem faced, method of solution, result, discussion and conclusion. Introduction of project described briefly about the material used that is ... -
Low cost ergonomics imrovement in Small and Medium Enterprise (SME)
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-05)Economic activity in Small and Medium Enterprise (SME) is on fast developing in Negara Asia. Careful examination on real workplace situation is very important. Risk assessment is an activity which is proving effective in ... -
Implementation of Lean Technique 5S at Corrugated Fiberboard Carton industry
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-05)In organizational development, process improvement is a series of actions taken to identify, analyze and improve existing processes within an organization to meet new goals and objectives. Therefore, implementation of 5S ... -
One switch controlling all fan and lights : implementation for housing in Malaysia
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-04)The purpose and goal of this final year project is the implementation of One Switch for housing in Malaysia where the switch controls all the fans and lights in the house at the same time. In addition, the implementation ... -
The landscape lighting using LED
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-05)This final year project explains how to create a rich landscape lighting using light emitting diode compared to the rich fluorescent lamps and to reduce the cost for a long time, reducing energy consumption and to reduce ... -
The study of value stream mapping (VSM) and Kanban in an automotive parts manufacturer
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-04)This research addresses the application of lean manufacturing concepts to the continuous process sector with a focus on the production manufacturing plant. The goal of this project is to make an improvement by applying ... -
A study on design and develop a concurrent problem solving method in mould flow analysis
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2009-05)CAE techniques have in recent years, become increasingly popular in plastic injection molding. However, in most practices, either molding parameters are not optimized or the optimization techniques are too complex to use. ... -
Design and analysis of an accurate macro-scale friction measurement set-up
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-04)This study has identified two types of friction that are found when dealing with two surfaces of a body which are in contact. One type friction has a coefficient of static friction, μ s, which increases the longer the ... -
Ergonomics improvement in CATIA Computer Lab at School of Manufacturing
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-04)This project is discussed about the ergonomics improvement in the computer laboratory CATIA. Ergonomics is a design of equipment that fits human. This includes equipment, furniture, environmental and others. Based on the ... -
Natural ventilation design of a terrace house
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-05)Natural ventilation is the process of supplying and removing air by means of purpose-provided aperture (such as openable windows, ventilators and shafts) and the natural forces of wind and temperature-difference pressures. ... -
A process improvement on the autoclave process at Asian Composite Manufacturing, Bukit Kayu Hitam, Kedah
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-05)This final year project is to describe about the process improvement on the manufacturing shop floor. In this work, to find out more, research had been done in one of manufacturing industry to identify process need to be ... -
Extraction optimization of phenolic compond from Zingiber Aromaticum Rhizome using pressurized hot water extraction (PHWE)
(Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)Pressurized hot water extraction (PHWE) method was implemented in order to reduce the usage of organic solvent in extracting phenolic compound from the rhizome of Zingiber aromaticum. At first, the screening studies using ... -
Study of machining parameter of wire electrical discharge of nickel-base alloys using response surface method
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-04)Study of Machining Parameter of Wire Electrical Discharge of Nickel-Base Alloys using Response Surface Method (RSM) had been done in this project. WEDM machine that use for this project is SODICK AQ327L that located at ... -
Production of fatty acid methyl ester biofuel from low value waste vegetable oil using acid catalyst
(Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2013-06)Production of Fatty Acid Methyl Ester (FAME) from low value waste vegetable oil using acid catalyst is further described in this work. The raw materials used in this study, which is the waste cooking oil (WCO) is collected ... -
Temperature regulated cooking of Keropok Lekor
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010)This report is a final-year project documentation that is done for the two semesters in UniMAP. This project is about the grilling process that will be used to cook or to roast keropok lekor. In the cooking, the temperature ... -
Design and development of the power transmission mechanism and rim for a Go-Kart
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-05)In this project report, it will show that design delivery system and also tyre frame gocart is one of the strategies used by design engineer mechanical to compete with other go-cart. A delivery system, it is responsible ... -
Analysis of the heat transfer process inside a Lemang oven using computational fluid dynamics (CFD)
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-05)Experimental testing is carried out to discover the temperatures at the certain oven surface at the certain times. This steps required because to compare the result of analysis by using CFD with the experimental result. ... -
Low cost ergonomics improvement in Small and Medium Enterprise (SME)
(Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-04)The objectives of this study are to identify the common ergonomics issues or problems in Small and Medium Enterprise (SME) and to implement low-cost ergonomics improvement for SME based on selected company. This study was ...