Show simple item record

dc.contributor.authorNor Ashbahani, Md. Kajaan
dc.contributor.authorIsmail, Daut, Prof. Dr.
dc.contributor.authorMd. Reza, Md. Mohyin
dc.date.accessioned2011-01-06T06:41:14Z
dc.date.available2011-01-06T06:41:14Z
dc.date.issued2010-06-23
dc.identifier.citationp. 122-125en_US
dc.identifier.isbn978-1-4244-7127-0
dc.identifier.urihttp://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5559200
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/10424
dc.descriptionLink to publisher's homepage at http://ieeexplore.ieee.org/en_US
dc.description.abstractIn this paper, the result of an investigation on the effect of using M4 Grain-Oriented Silicon Iron core material to the 100kVA three phase distribution transformers has been analyzed. The investigation includes the variation of power loss and flux leakage with 5mm different overlap length with staggered yoke and limb configuration. Both power loss and flux leakage has been measured using no-load test with 15 layer of lamination. The power loss of the transformer model core at the operation mode flux density, 1.5T is 1.079W/Kg. The flux leakage at T-joint is observed to be higher than that in the corner joint with 47.3uT and 37.6uT respectively during operation mode, 1.5T.en_US
dc.language.isoenen_US
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)en_US
dc.relation.ispartofseriesProceedings of the 4th International Power Engineering and Optimization Conference (PEOCO) 2010en_US
dc.subjectGrain-oriented silicon ironen_US
dc.subjectTransformer coreen_US
dc.subjectFlux distributionen_US
dc.subjectPower lossen_US
dc.subjectLeakage fluxen_US
dc.titleMeasurement of overall power loss and flux leakage in M4 grain-oriented silicon iron assembled with 45o T-joint of three phase transformer coreen_US
dc.typeWorking Paperen_US
dc.contributor.urlismail.daut@unimap.edu.myen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record