Show simple item record

dc.contributor.authorZuraidawani, Che Daud
dc.contributor.authorShamsul Baharin, Jamaludin, Prof. Dr.
dc.contributor.authorFazlul, Bari, Dr.
dc.date.accessioned2010-11-09T03:34:24Z
dc.date.available2010-11-09T03:34:24Z
dc.date.issued2010-06-09
dc.identifier.citationp.204-207en_US
dc.identifier.isbn978-967-5760-02-0
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/10162
dc.descriptionInternational Conference on X-Rays and Related Techniques in Research and Industry (ICXRI 2010) jointly organized by Universiti Malaysia Perlis (UniMAP) and X-Ray Application Malaysia Society (XAPP), 9th - 10th June 2010 at Aseania Resort Langkawi, Malaysia.en_US
dc.description.abstractThis research was carried out to fabricate and characterize Co-Cr-Mo (F-75) alloy. The samples have been prepared via solid state sintering. The powders were supplied by Sandvik Osprey Ltd, UK and special design for biomedical applications. The lab work comprises the mixing of F-75 powder with 2 wt. % of binder. The mixture was cold compacted using uniaxially press at 500 MPa. The samples were sintered at three different temperatures (1250 °C, 1300 °C and 1350 °C) in inert environment for 90 minutes of sintering time. The sintered samples were characterized by using scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS) and optical microscope (OM) Olympus BX41M. Bulk density, apparent porosity, percentage of linear shrinkage, and microhardness of the samples were also characterized. The average of the grain sizes were measured by line intercepts method. The optical micrographs showed the difference grain size in all sintered samples after etching with Marble reagent. The result shows the percentage of linear shrinkage, bulk density value and porosity increase with increasing the sintering temperature. Beside that, higher sintering temperature yields coarser grain structure.en_US
dc.language.isoenen_US
dc.publisherUniversiti Malaysia Perlisen_US
dc.relation.ispartofseriesProceedings of the International Conference on X-Rays & Related Techniques in Research & Industry (ICXRI) 2010en_US
dc.subjectCo-Cr-Mo alloysen_US
dc.subjectPhysical propertiesen_US
dc.subjectSolid state sinteringen_US
dc.subjectInternational Conference on X-Rays & Related Techniques in Research & Industry (ICXRI)en_US
dc.titleCharacterization of Co-Cr-Mo (F-75) alloy produced by solid state sinteringen_US
dc.typeWorking Paperen_US
dc.publisher.departmentSchool of Materials Engineering & School of Environmental Engineeringen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record