Search
Now showing items 5531-5540 of 5568
Quality evaluation of microwave dried guava
(Universiti Malaysia Perlis (UniMAP), 2017-06)
This study is carried out to evaluate the effect of different microwave powers on the quality of microwave-dried guava in term of vitamin C degradation. The study was conducted by determining the initial moisture content ...
Synthesis and characterization of TiO2 using sol-gel method deposited on porous cordierite for water treatment application
(Universiti Malaysia Perlis (UniMAP), 2017-05)
Titanium dioxide (TiO2) which are the most utilized semiconductors in photocatalytic activity was prepared by sol-gel synthesis method and further dip-coating on macroporous cordierite. The excellent immobilization gave ...
Studies of blends of natural rubber and styrene-butadiene rubber/citronella fibre composite: the effect of physico-mechanical properties and morphology
(Universiti Malaysia Perlis (UniMAP), 2017-06)
Rubber composite filled with citronella fibre (CF) was prepared using two roll mill machine. The citronella fibre were undergone alkaline treatment before proceed to compound. Different ratio of filler were prepared with ...
Synthesis and characterization of ternary glass composition derived by sol-gel method
(Universiti Malaysia Perlis (UniMAP), 2017-04)
This study was conducted in order to investigate the effect of different Si/Ca ratio (reduced in CaO content) to the properties of ternary glass (SiO2-CaO-P2O5). The glass powder with Si/Ca ratio of 50:45, 70:25 and 90:5 ...
Effect of solvent on mechanical properties of Poly(Methyl Methacrylate)/Palm Kernel Shell composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)
This project is focused on the effect of solvent on the properties of Poly (Methyl Methacrylate) (PMMA) composites filled with palm kernel shell (PKS). The PMMA/PKS composites with different filler loading were prepared ...
Development of Al-Ni-Cu amorphous alloy powder
(Universiti Malaysia Perlis (UniMAP), 2017-06)
Mechanical alloying (MA) process was used in this research to produce amorphous
alloy powder by mixing Al, Ni, Cu powder in the planetary ball mill (pbm) for 8 hours, 16
hours and 24 hours corresponding to the two ...
Fabrication of Al-based metallic glasses by mechanical alloying and hot consolidation
(Universiti Malaysia Perlis (UniMAP), 2017-04)
This project is related to fabrication of aluminium based amorphous metallic glasses. Elemental powder of aluminium, copper and nickel were used for the purposed mentioned. The element powders with nominal composition ...
The effect of treated and untreated Citronella filler loading on curing characteristic and mechanical properties of NR/SBR blends
(Universiti Malaysia Perlis (UniMAP), 2017-04)
In this research, the effect of treated and untreated of Citronella filler loading from 10 phr until 50 phr on curing characteristic and mechanical properties of NR/SBR blends were studied. The Citronella leaves were ...
Sensors & Transducers v.215 (8) August 2017
(International Frequency Sensor Association Publishing, 2017-08-08)
Sensors & Transducers v.217 (11) November 2017
(International Frequency Sensor Association Publishing, 2017-11-11)