Browsing by Subject "Scanning electron microscopes"
Now showing items 1-13 of 13
-
Analysis of square shaped Microstructure based Electron Beam induced deposition
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)The fabrication of square shaped microstructures is studied by electron beam induced deposition (EBID) method using Scanning Electron Microscopy (SEM). EBID is a technique that allows the resistless deposition directly ... -
Analysis of the deposited carbon during Electron Beam Induced Deposition (EBID) in Scanning Electron Microscope using Secondary Ion Mass Spectrometry (SIMS)
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)Many experiments on the mechanics of nanostructures require the creation of rigid clamps at specific locations. In this work, electron beam induced deposition (EBID) has been used to deposit carbon films that are similar ... -
Comparative characterization of Clinker’s microstructure at different temperature zone during cement production
(Science Publications, 2007)Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ... -
Comparative Characterization of Clinker’s Microstructure at Different Temperature Zone during Cement Production
(Science Publications, 2007)Temperature is an important parameter for transformation of minerals in clinker during cement productions. It influences the formation of alite from belite during calcinations and clinkering processes. The result of ... -
Corrosion properties of Stainless steel
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)Chromium content in austenitic stainless steel 304 and 316L can increase the resistance to pitting corrosion through the formation of passive layer on the surface of metal. The corrosion properties of these stainless ... -
The CsCl- and CsN03-induced high temperature oxidation of Nimonic-90 alloy at 1123 K
(Elsevier Science B.V., 1996)Nickel-base alloys find vital scope in space and nuclear applications due to their numerous favourable properties such as low density, high strength and corrosion resistance. The high temperature oxidation of Nimonic-90 ... -
Effects of magnesium sulfate attack on ordinary portland cement (OPC) mortars
(Portuguese Electrochemical Society, 2008)The chemical and mineralogical compositions in Ordinary Portland Cement (OPC) were determined and cement which is low of C3A is more easily exposed to sulfate environment. The relation between physical strength of mortars ... -
Failure analysis and characterization of Ferrous-Base alloy exposed in seawater environment
(Universiti Kebangsaan Malaysia (UKM), 2008-12-03)Ferrous-base alloy are well-suited and widely used for a broad range of engineering applications such as structural steelwork, pipelines, vessels in refineries, thermal power plant establishment, etc. not for their corrosion ... -
Mechanical and thermoelectric properties of fused deposition modeling (FDM) fabricated ABS and CABS-ZNO composite
The mechanical and thermoelectric properties of fused deposition modeling (FDM) fabricated acrylonitrile butadiene styrene (ABS)/ zinc oxide (ZnO) and conductive acrylonitrile butadiene styrene (CABS)/ZnO were studied. The ... -
Physical properties of F75 (Co-Cr-Mo Alloys) mixed with Hydroxyapatite (HAP) for Biomedical devices
(Universiti Kebangsaan Malaysia (UKM), 2008-12-03)F75 (Co-Cr-Mo alloys) is primarily used in situations where strength, stiffness and fatigue endurance are required in biomedical devices. The physical properties of F75 mixed with stearic acid (binder) and varies percentage ... -
Study of acceleratin voltage influence the Conical structure during Electron Beam Induced Deposition (EBID)
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)Electron beam induced deposition (EBID) is a well established technique for highresolution direct material deposition from the gas phase onto a substrate. A finely focused electron beam of a scanning electron microscope ... -
Study of aspect ratio performance on Silicon Oxide wet etching by using Profilometer, AFM and SEM
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-03)A study of aspect ratio performance on silicon oxide is developing to predict the oxide profile on surface of wafer. The main focus of this project is to perform and produce a high profile of silicon oxide under profiler ... -
Study of Deposition Time Influence the Conical Structure during Electron Beam Induced Deposition (EBID)
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008-04)Atomic force microscopy (AFM) is now a well-established technique for the surface characterization and imaging of a variety of materials. In AFM the accuracy of data is often limited by the tip geometry and the effect on ...