Now showing items 1-20 of 90

    • The additive for cement and its properties 

      Mohd Hanafi, Roslan (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      This research was carried out to establish the properties and strength behaviour of concrete using additive using mix design concrete and constant water-cement ratio. The main objective of this study is to find the strength ...
    • The behavior of concrete containing mango seed 

      Nurol Hafizah, Zainal Abidin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Mango seed was used as partial replacement of sand. The replacement is done so that cost in construction reduced. Preparation of the raw material which is mango seed is easy. The mango seed is collected and let to dry. ...
    • Behavior of concrete with saw dust at fresh and hardened states 

      Noor Adlina, Md Daud (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Nowadays technology in concrete has been developing in many ways to enhance the quality and properties of concrete. For this project, saw dust is used in the making of concrete. This project is carried out to study the ...
    • Behavior of concrete with saw dust in different curing method 

      Faridatul Anis, Zainuddin (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      This proposal is intended to study the behavior of concrete with saw dust with different curing method like water tank, plastic, box and wet gunny. The proportioned mixture uses are cement, sand, aggregate, water and saw ...
    • The behavior of rubber tyre as fine aggregate in concrete mix 

      Siti Aza Nurdiana, Tajri (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014)
      Rubber tyres are the most waste material that can be found nowadays. Rubber tyre is the resilient materials that was used by people and make it as the waste tyre disposal after the tyre was not function anymore. Therefore, ...
    • Behavioral study of concrete composite with mixture of fly ash and concrete sludge aggregate 

      Mohd Shakirim, Harith (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Nowadays, the high demand of cement and aggregate are an indication of development especially for the construction industry. Thus, the alternative to replace partial replacement of cement and aggregate are by using the ...
    • The behaviour of construction waste as coarse aggregates 

      Norhayati, Hasim (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      This research is one of the positive methods by recycling construction waste material as the replacement to coarse aggregate in concrete mixture. The purpose of this study is to determine the performance of crushed ...
    • Carbonation of geopolymer concrete at different depth effect 

      Siti Noor Baizura, Sulaiman (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      Since admixtures for cement are known to enhance the properties of cement and by implication expand the quality of cement.. The Ordinary Portland Cement used as a primary binder in the concrete. Application of concrete ...
    • Cement mixture using waterfall stone powder of Titi Hayun, Kedah 

      Mohd Hafiz, Rodzi (Universiti Malaysia Perlis (UniMAP)School of Manufacturing Engineering, 2010-05)
      This project conducted to study whether the mixture concrete with stone from Titi Hayun, Kedah can be done to produce same strength with original strength cement. Normally cement strength is enough already to generate ...
    • Comparison of natural coarse aggregate and recycled coarse aggregate in concrete 

      Khairul Muzzamil, Azmi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      As a developing country, construction is the one of main incomes producing in Malaysia. Huge amount of demolition waste were produced from these activities. In Malaysia, the construction waste has cause a significant ...
    • Concrete reinforcement by using bamboo as reinforcement for low cost housing industry 

      Mohd Zaini, Othman (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)
      In this era, Concrete is the most used in construction material in the entire world. Characteristic of concrete has excellent in compressive strength, but low in tensile strength. As a result, steel commonly used in ...
    • Concrete-Shells Admixtures 

      Mohd Nurkhairie, Shahruddin; Mohd Muazzam, Ismail; Norazimah, Mat Alias; Norain, Ali; Roshayati, Zainudin (Universiti Malaysia Perlis (UniMAP)Pusat Pengajian Kejuruteraan Alam Sekitar (PPKAS), 2010-03-03)
      It was made of sea shell, bring the limited space oceanic feeling, it is natural and beautiful.
    • Decor Concrete Polymer (DCP) 

      Mohd. Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Khairul Nizar, Ismail, Dr.; Norazian, Mohamed Noor; Alida, Abdullah (Kementerian Pengajian Tinggi Malaysia (KPTM), 2007-08-10)
      Decor Concrete Polymer (DCP) was fabricated from mixing the composition of cement and polystrene wastes. The polystyrene wastes will act as coarse of fine aggregates in the mixture. This concrete can be used as lightweight ...
    • Design and construction considerations for prestressed concrete structures 

      Bin, Siao Wen (The Institution of Engineers, Malaysia (IEM), 2015-03)
    • Design and development of low cost lightweight concrete composites with mixture of fly ash and concrete sludge aggregate 

      Ooi, Wei Hong (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      In this research, fly ash and concrete sludge aggregates (CSA) as partial replacement have introduced into lightweight foam concrete where these materials play an important role to enhance the properties of concrete. Fly ...
    • The development of lightweight expanded polystyrene concrete blocks 

      Tey, Lee Huan (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)
      Nowadays, a new development of lightweight concrete has been introduced to use in construction. This is because lightweight concrete present an essential decrease in density if compared with normal concrete. The objective ...
    • Development of load bearing block from lightweight foamed concrete 

      Crystal Gayle’s, Robert (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)
      Development of lightweight concrete has been introduced to use in construction because lightweight concrete less density thus lighter than normal concrete. In this study, foam or bubbles resulting from the base oil used ...
    • Development of Palm Oil Fuel Ash (POFA) based portland cement and evaluation of compatibility with superplasticizers 

      Mohd Fareez, Othman (Universiti Malaysia Perlis (UniMAP), 2015-06)
      In this era, concrete is one of the most important construction materials used throughout the world especially for the construction sector. This study examined the effects that occur in terms of workability and strength ...
    • The effect of different particle size of steel slag as filler in concrete 

      Ellisha, Anak Iling (Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)
      Manufacturing of Ordinary Portland Cement(OPC) will produces high consumption of energy and carbon dioxide emission. This study is to produce a concrete that uses steel slag as cement replacement. 20% of steel slag and 80% ...
    • Effect of Effective Microorganisms (EM) on concrete performance 

      Mohd Amiruddin, Roslan (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-05)
      Concrete technology is life-long research. The technology strives to discover the best additives or admixtures that are able to produce good concrete in terms of physical, chemical and mechanical properties in a more ...