Browsing by Author "zuhaila@eng.usm.my"
Now showing items 1-7 of 7
-
Compressive and wear resistance of alumina reinforced fe-cr matrix composites
Saidatulakmar, Shamsuddin; Shamsul Baharin, Jamaludin, Prof. Dr.; Zuhailawati, Hussain; Zainal Arifin, Ahmad (Scientific.Net, 2012-12)Fe-Cr matrix composite reinforced with alumina with mean powder sizes of 13, 23, 24 and 64 μm was successfully obtained through powder metallurgy method. The powder mixture were blended at a rotating speed of 250 rpm for ... -
Dry sliding wear and compressive strength of Fe-Cr matrix composite with and without Al2O3 reinforcement
Shamsul, Baharin Jamaludin, Prof. Dr.; Saidatulakmar, Shamsuddin; Zuhailawati, Hussain; Zainal Arifin, Ahmad (IEEE Conference Publications, 2011)Fe-Cr matrix composites reinforced with Al2O3 particulates fabricated by powder metallurgy (PM) method offer potential for cheaper wear resistance materials and high temperature application. The influence of Al2O3 amount ... -
Effects of composition on the mechanical properties and microstructural development of dilute 6000 series alloys
Azmi, Rahmat, Assoc. Prof. Dr.; Ismail, Zainol; Aiza, Jaafar; Zuhailawati, Hussain, Assoc. Prof. Dr. (Asian Network for Scientific Information (ANSINET), 2012)The aim of the present investigation is to study the effect of composition on the mechanical properties and microstructural development during thermal treatment of some dilute 6000 aluminium alloys. The alloys were based ... -
Fabrication and characterisation of powder metallurgy Fe-Cr Matrix composites reinforced with Al2O3
Saidatulakmar, Shamsuddin; Shamsul, Baharin Jamaludin, Prof. Dr.; Zuhailawati, Hussain, Dr.; Zainal Arifin, Ahmad, Prof. (Trans Tech Publications, 2013)Sintered powder metallurgy Fe based composites with advanced mechanical properties have been proposed as substitutes for more expensive cemented carbide and wrought alloys in many applications, especially as inexpensive ... -
Fabrication of titanium carbide reinforced copper matrix composite by in-situ processing
Nur Hawadah, Mohd Subhi; Zuhailawati, Hussain; Radzali, Othman (Universiti Malaysia PerlisSchool of Materials Engineering & School of Environmental Engineering, 2010-06-09)Composite materials with copper matrix and ceramic particle reinforcements provide an alternative material for scope for producing relatively high thermal conductivity, electrical conductivity and hardness properties. Most ... -
The influence of 71Ag-28Cu-1Mg filler alloy on microstructure and properties of spot brazed Titanium/Nickel joint
Hussain, Zuhailawati; Alaa Muhsin, Saeed; Ahmad Badri, Ismail; Tadashi, Ariga (Universiti Malaysia Perlis, 2009-12-01)The shear strength and microstructural characteristics of titanium-nickel joints joined by spot brazing technique was investigated in this work. The spot brazing process was performed with and without addition of 71Ag-28Cu-1Mg ... -
A review on Alumina based ceramic composites as cutting and machining tool materials
Mary, Donnabelle Balela; V., Vannaladsaysy; Zuhailawati, Hussain (Universiti Malaysia Perlis, 2007)New trends in the cutting and machining tool industry include faster cutting rate, dty cutting and highly wear resistant tool materials. These requirements are necessary for higher production rate and improved dimensional ...