Browsing by Author "Che Mohd Ruzaidi, Ghazali, Assoc. Prof."

Now showing items 1-20 of 22

    • Anti x-ray geopolymer composite material 

      Liyana, Jamaludin; Mohd Mustafa Al Bakri, Abdullah; Muhammad Faheem, Mohd Tahir; Rafiza, Abdul Razak; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Ali Basheer, Azeez; Mohd Firdaus, Abu Hashim (Universiti Malaysia Perlis (UniMAP)CEGeoGTech, 2014-05)
      It is well known that X-rays give bad effects to humans and can cause cancer. Thus, the use of anti x ray geopolymer composite material will help reducing the effects of X-ray penetration to individuals nearby.

    • Ceramic Waste Concrete (CWC) 

      Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Norazian, Mohammed Noor; Norzaidi, Zainol (Kementerian Pengajian Tinggi Malaysia (KPTM), 2007-08-10)

    • Clay Filled Aluminum Product 

      Mohd Ichwan, Nasution, Ir.; Shamsul Baharin, Jamaludin, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Faizul, Che Pa; Chek Idrus, Omar (Malaysian Invention and Design Society (MINDS), 2007-05-18)
      Material for aluminium product usually made from aluminium scrap. Nowadays, the price of aluminium scrap increased. The idea is how to minimize the cost of production threw minimize the weight of the product without changing ...

    • Comparative Study on Mechanical Properties and Microstructure of Binary Aluminium Alloy using Sand and Green Sand Molds 

      Mohd Ichwan, Nasution, Ir.; Shamsul Baharin, Jamaludin, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Faizul, Che Pa (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      Products of binary system especially for aluminium alloys and others binary are of great use.However, mechanical properties of these products are still low because of wrongly chosen the types of molds. Therefore,it is ...

    • Decor Polymer Concrete (DPC) 

      Mohd Mustafa, Al Bakri Abdullah; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Prof. Dr.; Norazian, Mohamed Noor; Mohammad Tamizi, Selimin; Norzaidi, Zainol; Rozaimah, Ramly (School of Materials Engineering, 2008-01-09)
      Decorative application. Non-structural. Raw materials from polymer waste such as HOPE, PS, PET and others.

    • Decorative Bagasse Fiber Board 

      Mohd Mustafa, Al Bakri Abdullah; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Prof. Dr.; Norazian, Mohamed Noor; Norzaidi, Zainol; Liyana, Jamaludin (School of Materials Engineering, 2008-01-09)
      Use as a colourful panel board or partition panel. Cost saving of raw material and used to replace conventional fiber board. Raw material from waste which is bagasse.

    • Effect of Compatibilizer on Mechanical Properties and Morphology of Clay Filled Low Density Polyethylene (LDPE) Composites 

      Salmah, Husseinsyah, Dr. Ir.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; A.H. Suhaiza (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      The main purpose of incorporating fillers, such as clay into composites of polyolefin is to decrease costs and change the properties. Structural differences between both components give rise to the formation of large filler ...

    • The Effect of Coupling Agent on Thermal Properties and Morphology of Paper Sludge Filled Polypropylene (PP)/Ethylene Propylene Diene Terpolymer (EPDM) Composites 

      Salmah Husseinsyah, Dr. Ir.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Supri, A. Ghani, Dr. (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      The paper sludge was used as a filler in PP/EPDM composites and 3-aminopropyl triethoxysilane (3-APE) was used as a coupling agent in this study. The effects of filler loading and 3-APE on the thermal properties and ...

    • Effect of palm slag filler size on the mechanical and wear properties of brake pad composites 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (American Scientific Publishers, 2013-01)
      Particle size of filler and other material that involved in brake pad composites are expected to be able to strongly influence the wear properties and performance. Palm slag as a filler in brake pad was investigated in ...

    • Grass-Plastic Deco Panel 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof. (School of Materials Engineering, 2008-01-09)
      For commercial product such as panel, paper and for decoration.

    • High Strength K-Brick: Rapid Set Brick 

      Mohd Mustafa, Al Bakri Abdullah; Mohammad Tamizi, Selimin; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Prof. Dr.; Norazian, Mohamed Noor; Mohd Nasir, Ibrahim; Norzaidi, Zainol (School of Materials Engineering, 2008-01-09)

    • Hot air solder levelling (HASL) process parameters optimization for SN100CL 

      Fatin Afeeqa, Mohd Sobri
      Reliability of electronic packaging has now become the most critical factor in electronic industries. The prediction of solder joint failure and its shelf life becomes more challenging as the increasing demand for superior ...

    • New Approach to Aluminium-Polymer Alloys 

      Mohd Ichwan, Nasution; Mohd Nasir, Zainal Arif, Prof.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Shamsul Baharin, Jamaludin, Assoc. Prof. Dr.; Faizul, Che Pa; Murizam, Darus; Che Idrus, Omar; Lee Liu Mei (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      New approach to aluminium-polymer alloys prepared by in-situ mixing or addition of molten metal onto polymer granules will be highlighted. This concept is simple and never been attempted before due to the thermal instability ...

    • New Approach To Aluminium-Polymer Alloys 

      Mohd Ichwan, Nasution, Ir.; Mohd Nasir, Zainal Arif, Prof.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Shamsul Baharin, Jamaludin, Assoc. Prof. Dr.; Faizul, Che Pa; Murizam, Darus; Chek Idrus, Omar; Lee Liu Mei (School of Materials Engineering, 2008-01-09)

    • A novel industrial waste filler brake pads 

      Alida, Abdullah; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr. (Macao Innovation & Invention Association, 2012-06-29)
      Friction composite is an important of braking system for all types of vehicles especially as brake pad. Industry waste fiber is a novel invention is new friction materials with the existing brake pad in the market.

    • A novel industrial waste filler brake pads 

      Alida, Abdullah; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Prof. Dr. (Universiti Sains Malaysia, 2012-07-17)
      Friction composite is an important of braking system for all types of vehicles especially as brake pad. Industry waste fiber is a novel invention is new friction materials with the existing brake pad in the market.

    • Oxidation behavior of sensitized AISI 310 steel in KNO3 and K2CO3 at 1123 K 

      Mohd Misbahul, Amin, Assoc. Prof.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Amin, N. (The Minerals, Metals and Materials Society, 2009-12-07)
      Sometimes the operating temperature is such that the stainless steel can become sensitized, i.e. chromium carbide can precipitate at grain boundaries. The behavior of sensitized stainless steel is quite different from that ...

    • PC (Polystyrene Concrete) 

      Mohd Mustafa Al-Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Dr.; Norzaidi, Zainol; Mohd Tajuddin, Idris (Malaysian Invention and Design Society (MINDS), 2007-07-18)
      Polystyrene Concrete (PC) was fabricated by mixing the composition of cement and polystyrene wastes. The polystyrene wastes will act as coarse or fine aggregates in the mixture. PC can be transformed into useful product ...

    • PCB Waste Brake Pad 

      Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Radzi Ali, Mohamed Faisol (Universiti Teknologi MARA, Kedah, 2010-07-28)
      Brake pad is an important of braking system for all typer of vehicles. Asbestos was widely used in pads for its heat resistance, but due to health risks, it has now been replaced by a mix of alternative fibers such as ...

    • Role of SiO2 on Mold Making Process in Foundry Metallurgy 

      Mohd Ichwan, Nasution, Ir.; Shamsul Baharin,Jamaludin, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof. (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      Natural sands are varied, both chemically and physically. SiO2 is the largest content besides of Na2O, K2O and Fe2O3 with variety of grain size distribution. For molding purposes, sands should have a minimum of 95% SiO2, ...