Now showing items 57478-57497 of 79151

    • Production of lightweight aggregate from fly ash and clay 

      Mohamad Hafiz, Hanapi (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      The main objective of this study is to determine whether fly ash and clay can be used to produce lightweight aggregate, study the durability of lightweight aggregate from fly ash and clay and to make comparison between ...
    • The Production of Lightweight Aggregates from Local Wastes 

      Khairul Nizar, Ismail, Dr.; Mohd Sobri, Idris; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Sabarudin, Mohd; Khairun Azizi, Mohd Azizli (International Exhibition of Inventions, 2007-04-18)
      The main aim of this reasearch was to produce lightweight aggregates which can be used as replacement for normal (natural) aggregates in structural concrete. Rice Husk Ash, Fly Ash and Quarry Dust was the main raw materials ...
    • The Production of Lightweight Aggregates from Local Wastes 

      Khairul Nizar, Ismail, Dr.; Mohd Sobri, Idris; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Sabarudin, Mohd; Khairun Azizi, Mohd Azizli (Polish Association of Inventors and Rationlizers, 2007-05-30)
      The main aim of this research was to produce lightweight aggregates which can be used as replacement for normal (natural) aggregates in structural concrete. Rice Husk Ash, Fly Ash and Quarry Dust was the main raw materials ...
    • The production of lightweight aggregates using ordinary portland cement 

      Hamizi, Yahya (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013)
      The research study covers the production of lightweight aggregates using Ordinary Portland cement (OPC) without involved any heat treatment. The main aim of this research was to produce lightweight aggregate as artificial ...
    • Production of lightweight concrete from waste clay brick 

      Ainur Syahirah, Abdul Rahman (Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)
      Nowadays, concrete is known as a common material which is widely used in the world. This study has been carried out to identify alternative materials that can be used to replace aggregate in lightweight concrete production. ...
    • Production of methane gas from organic fraction municipal solid waste (OFMSW) via anaerobic process: Application methodology for the Malaysian condition 

      Irnis Azura, Zakarya, Dr.; Ismail, Abustan, Prof. Dr.; Norli, Ismail, Dr.; Mohd Suffian, Yusoff, Assc. Prof. Dr. (Inderscience Enterprises Ltd, 2013)
      Solid waste management in Malaysia is confronted with many problems, including low collection coverage, irregular collection services, inadequate equipment used for waste collection, crude open dumping and burning without ...
    • Production of methane gas from organic fraction municipal solid waste (OFMSW) via anaerobic process: Application methodology for the Malaysian condition 

      Irnis Azura, Zakarya; Ismail, Abustan; Norli, Ismail; Mohd Suffian, Yusoff (Inderscience Enterprises Ltd., 2013)
      Solid waste management in Malaysia is confronted with many problems, including low collection coverage, irregular collection services, inadequate equipment used for waste collection, crude open dumping and burning without ...
    • Production of new soap from recyclable material 

      Nadya Orsela, Andico (Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2016-06)
      Recycle is known as the process of converting waste materials into new product that potentially useful. In this project, new soap is produced from disposed hotel bar soap to reduce the waste from hotel. Water content, ...
    • Production of non shredded empty fruit bunch semi-compost 

      Abu Zahrim, Yaser; Asis, Tahang (The Institution of Engineers, Malaysia, 2010-12)
      Composting of the empty fruit bunch (EFB) with the palm oil mill effluent (POME) could simultaneously treat the solid and liquid waste from palm oil mill. With the aim to reduce the composting yard area, production of ...
    • Production of novel epoxy micro-balloons 

      Du Ngoc Uy Lan, DuNgoc, Dr.; Azhar, Abu Bakar, Dr.; Baharin, Azahari, Dr.; Zulkifli, Mohamad ariff, Assoc. Prof. Dr. (Elsevier, 2009)
      Epoxy micro-balloons are prepared by dropping and stirring of epoxy mixture in heated silicon oil. The mixture of epoxy, curing agent and blowing agent forms sphere particles, which are then blown via the function of blowing ...
    • The production of paper from sugarcane bagasse 

      Ahmad Nurhilmi, Abdul Gani (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      The paper industry worldwide always faced a problem on lack of raw material due to deforestation. The agriculture waste material can be an alternative raw material to produce paper. For this study, sugarcane bagasse was ...
    • Production of particle board from banana leaves 

      Wan Suhardi Wan Md. Sukri (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-06)
      The method of agricultural waste disposal involving open burning which often to be used by the banana plantations entrepreneur is unpractical where it is contribute to air pollution. Base on the situation above, this study ...
    • Production of particle board from sugarcane bagasse 

      Mohd Zamri Abdullah (Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)
      Particle board has been used widely in the furniture industry nowadays. In this study, the production of particle board from sugarcane bagasse is to reduce the waste of bagasse and air pollution. This study produced by ...
    • Production of recombinant urease for screening of helicobacter pylori infection 

      Che Wan Sharifah Robiah, Mohamad (Universiti Sains Malaysia (USM)School of Biological Sciences, 2014-09)
      Helicobacter pylori establishes infection inside human stomach lining and causing duodenal diseases, such as peptic ulcer and potentially into gastric cancer. The invasive diagnostic methods require unpleasant endoscopic ...
    • Production of sea mango (Cerbera Odollam) based activated carbon for CO2 adsorption 

      Nur Hidayah, Azmi
      The activated carbon utilization for carbon dioxide (CO2) adsorption process is a promising method to reduce the emission of CO2. The activated carbon was produced from the non-edible sea mango (Cerbera odollam) fruit ...
    • Production of self-compacting concrete containing limestone powder with the effect of internal and external salts 

      Duha Abdalla Najm, Al-Gburi
      This study aims at investigating the influence of different amounts of internal sulphate (CaSO4) and external salts on the properties of Self-Compacting Concrete (SCC). Three sets of mixes (No.1), (No.2) and (No.3) which ...
    • Production of silicon carbide via grinding and heat treatment process 

      Noorina Hidayu, Jamil; Xian, W. Hui; Wan Mohd Arif, Wan Ibrahim; Faizul, Che Pa; Ruhiyuddin, Mohd Zaki (Trans Tech Publications, 2014)
      This study is to determine the properties and characterization of silicon carbide via grinding and heat treatment process. In this study, the raw materials used were waste glass and graphite powder. Silicon carbide was ...
    • Production of thermal insulation building materials to reduce effect on indoor thermal environment 

      Sharifah Nora, Syed Shuhaimi (Universiti Malaysia Perlis (UniMAP), 2015-06)
    • Production of wollastonite from local resources 

      Noorina Hidayu, Jamil; Wan Mohd Arif, Wan Ibrahim; Noorhamizah, Muhd Said (Trans Tech Publications, 2013)
      This project is focused on the production of wollastonite (CaSiO3) from local resources. Wollastonite was produced by milling silica (SiO2) and limestone (CaCO3) in planetary mill for 1 and 5 hours. Samples have been ...
    • Production Planing and Control 

      Universiti Malaysia Perlis (UniMAP) (Universiti Malaysia Perlis (UniMAP), 2020-12)