Browsing by Title
Now showing items 28177-28196 of 79085
-
Influence of dissipation power in copper sputtering plasma measured by optical emission spectroscopy
(Trans Tech Publications, 2014)Copper oxide is a low cost material, easy process fabrication and sensitivity to ambient conditions. Therefore, it is a suitable p-type semiconductor oxides material to be used as a gas sensing material. In order to raise ... -
Influence of dolomite on the mechanical properties of boiler ash geopolymer paste
(Trans Tech Publications, 2014)The waste material from palm oil industry has been increasing since Malaysia was the world largest exported of palm oil mill. The waste such as palm fibers, nut shells, palm kernel and empty fruit bunches are the solid ... -
The influence of employees’ competency on safety behavior
(Universiti Malaysia Perlis (UniMAP), 2009-12-01)Objective: The aim of this paper is to investigate the influence of competency among the employees working in the petrochemical industry on their safety behavior while performing the jobs at the workplace. Problem: Safety ... -
Influence of environmental factors on job satisfaction in Malaysian automotive industries
(The Institution of Engineers, Malaysia, 2008-09)A relationship between selected environmental factors and job satisfaction was developed for employees in the automotive industries in Malaysia. Methods in developing the relationship include questionnaire design, data ... -
The influence of exfoliated graphite on sensing properties of chitosan / PVA based ammonia sensors
Chitosan was used as a sensing material for gas sensing applications. In order to nurture the chitosan properties as a sensing material, chitosan (CS) was blended with polyvinyl alcohol (PVA) and filled with exfoliated ... -
The influence of filler metal on porosity formation of AA6061 aluminium alloy joints
(Universiti Malaysia Perlis, 2009-12-01)Porosity is very important parameter to evaluate the quality of butt-joint since it is recognized to be one of the major concerns during welding of aluminium alloys. The filler metal used during welding process is believed ... -
Influence of flange stiffness on shear capacity of sinusoidal profiled web girder using finite element method
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)A finite element analysis had been done to study the influence of the flange stiffness on shear capacity of sinusoidal profiled web girder. A three-dimensional finite element model is proposed using LUSAS (version 13.6) ... -
The Influence of Forensic Accounting Competence and Independent Audit Committee on Anti-Fraud in Firm Performance
(School of Business Innovation and Technopreneurship, Universiti Malaysia Perlis (UniMAP), 2022-06)Anti-fraud is a special field in identifying, diagnosing and treating fraud, and entails the gathering, management, investigation, and utilisation of business data. This research investigated the effect of both the forensic ... -
Influence of four wave mixing on modulation format performance under 100 Gb/s data rate
(Institute of Electrical and Electronics Engineers (IEEE), 2012-12-05)Four-wave mixing (FWM) is undesirable nonlinear effects that can degrade the optical transmission system. Under high data rate, i.e. 100 Gbps, and ultra-long haul distance, the effects of FWM can limit the system performance ... -
Influence of gamma irradiation on the electrical conductivity and dielectric properties of polypyrrole conducting polymer composite films
(Universiti Malaysia Perlis (UniMAP), 2019-10)Electrical conductivity and dielectric properties of polypyrrole conducting polymer composite films were investigated using gamma irradiation from 0 kGy up to 25 kGy. The AC conductivity is directly proportional to the ... -
Influence of grain size on isothermal oxidation of Fe-33Ni-19Cr alloy
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)This research study describes the influence of grain size on isothermal oxidation of Fe- 33Ni-19Cr alloy. The Fe-33Ni-19Cr alloy plate was cut into desired dimension and undergone heat treatment of 3 different temperatures ... -
Influence of H2 SO4 solution on formation of porous AAO thin film
(Universiti Malaysia PerlisSchool of Materials Engineering, 2008-04)The fabrication of self-ordered anodic aluminum oxide (AAO) by anodization of Al foils and pure aluminum in sulfuric acid solution was investigated. The influences of anodizing variables, such as applied voltage, the ... -
Influence of H2C204 solution on formation of Porous AAO thin film
(Universiti Malaysia PerlisSchool of Material Engineering, 2008-04)The anodizing of aluminium has been investigated with the aim to realize nano-porous structures and nano-porous oxides for use as nano-templates. Before undergoing electrochemical oxidation, aluminium samples were cleaned ... -
Influence of Heavy Metal on activated Sludge activity: DO and SOUR monitoring
(Universiti Malaysia Perils, 2007)The objective of this study is to evaluate the inhibitory effect of heavy metals on activity of activated sludge microbes, under sequencing batch reactor (SBR) operation, based on dissolved oxygen (DO) and specific oxygen ... -
The influence of human head model wearing metal-frame spectacles to the changes of SAR and antenna gain: Simulation of frontal face exposure
(EMW Publishing, 2013)The relationship between specific absorption rate (SAR) and antenna gain inside the head due to the metal-frame spectacles was investigated. The radio frequency (RF) energy source considered is the smartphone used in the ... -
The influence of human head model wearing metal-frame spectacles to the changes of SAR and antenna gain: Simulation of frontal face exposure
(EMW Publishing, 2013)The relationship between specific absorption rate (SAR) and antenna gain inside the head due to the metal-frame spectacles was investigated. The radio frequency (RF) energy source considered is the smartphone used in the ... -
Influence of impurities and catalyst surface characteristics on the oxygen charge transfer reaction in the Pt/YSZ system
(Elsevier B.V., 2012-10-04)Spillover processes (i.e. the migration of ionic species from the support to the catalyst and vice versa) are known to play a very important role in catalysis and electrocatalysis. These spillover processes can be influenced ... -
The influence of job stress towards turnover intention among generation Y employees in Perak Information Technology (IT) industry
(School of Business Innovation and Technopreneurship, Universiti Malaysia Perlis (UniMAP), 2023-06)Researchers have been studying turnover intention for nearly a century. Recently, most generation Y workforce in Malaysia's Information Technology (IT) industry reportedly developed a norm of switching jobs constantly ... -
Influence of kaolin geopolymer ceramic additions to the wettability and electrical properties of Sn-3.0Ag-0.5Cu (SAC305) lead free solder
(IOP Publishing Ltd, 2019-12)The effect of kaolin geopolymer ceramic addition to the wettability and electrical resistivity of Sn-3.0Ag-0.5Cu (SAC305) lead free solder was successfully explored. Powder metallurgy with microwave sintering method was ... -
Influence of kaolin in fly ash based geopolymer concrete: destructive and non-destructive testing
(IOP Publishing Ltd, 2018-06)Development of geopolymer concrete is mainly to reduce the production of ordinary Portland cement (OPC) that adverse the natural effect. Fly ash is a by-product collected from electrical generating power plant which resulted ...