Browsing by Title
Now showing items 58300-58319 of 79150
-
Properties and characterization of cerber mangas (sea mango) filled poly (vinyl alcohol) biocomposite films
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06)This research was focused on the effect of sea mango fiber (SMF) content and chemical modification on tensile and thermal properties, morphology and moisture content of poly(vinyl alcohol) (PVA)/sea mango fiber (SMF) ... -
Properties and characterization of ground granulated blast furnace slag geopolymer at high temperature exposures
Geopolymerization process using ground granulated blast furnace slag (GGBFS) as aluminosilicate sources was performed. The utilization of GGBFS as an alternative and renewable material for Portland cement is growing due ... -
Properties and characterization of Polyvinylide Fluoridepolytetrafluroethylene (PVDF-PTFE) membrane using N-Methyl-2-Pyrrolidone (NMP) and Dimethylacetamide (DMAc) as a solvent
(Universiti Malaysia Perlis (UniMAP)School of Bioprocess Engineering, 2016-06)Membrane technology has gradually become a popular separation technology over the past few decades. There are significant advantages of using membranes for industrial processes such as no phase changes or chemical ... -
The properties and photocatalytic behaviour of TiO₂ and ZnO particles after modification with PVP and Ag nanoparticles
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-05)The commercialized zinc oxide (ZnO) and titania (TiO₂) powders are modified with polyvinylpyrrolidone (PVP) and silver (Ag) nanoparticles. The modification process is done via a simple wet chemistry method. The effect of ... -
Properties comparison between ordinary portland cement (OPC) and palm oil fuel ash (POFA) concrete reinforcement
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)The increase in the production of palm oil had caused existence of problem in oil palm dust disposal in Malaysia that is world's largest exporter. Realizing effect of this problem, various solutions raised to overcome ... -
Properties of a New Insulation Material Glass Bubble in Geopolymer Concrete
(MDPI AG, 2021-02)This paper details analytical research results into a novel geopolymer concrete embedded with glass bubble as its thermal insulating material, fly ash as its precursor material, and a combination of sodium hydroxide (NaOH) ... -
Properties of Al and Pd contacts on n-type SiC membranes
(Materials Research Society, 2012-04)Membranes with dimensions up to 10 mm x 15 mm have been fabricated in epitaxial 3C-SiC/Si wafers. An array of CTLM metal contacts was deposited onto the upper surface of the n-SiC membrane. Both Al/n-SiC and Pd/n-SiC ... -
Properties of bricks with installation of bamboo fiber
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2012-05)The sand bricks are usually used extensively in the construction industry as a wall panel, part of the construction of drains and so on. Basically, sand bricks are using cement and normal sand such as ordinary Portland ... -
The properties of carbon nanotube on novel calixarene thin film
(Universiti Malaysia Perlis, 2015)This study focuses on the properties of carbon nanotube effect on novel calix[8]arene thin film as ion sensing application. The modification of calix[8]arene and carbon nanotube (CNT) were made by both components dissolved ... -
Properties of carbon nanotubes and calcium carbonate filled polymer composites
(Universiti Malaysia Perlis (UniMAP)Scholl of Materials Engineering, 2016-05)This project was focused on the fabrication and characterization of CNTs-CaCO3 filled epoxy composites. The polymer composites were prepared with different ratio of filler loading by using a mechanical stirrer with speed ... -
Properties of chicken feather fiber-filled low-density polyethylene composites: The effect of polyethylene grafted maleic anhydride
(Taylor and Francis Group, LLC., 2013-04)The effects of polyethylene grafted maleic anhydride on tensile properties, morphology, thermal degradation, and swelling behavior of low density polyethylene/chicken feather fiber composites were studied. The LDPE/CFF ... -
Properties of chicken feather fiber/tyre dust hybrid composition filled recycled high density polyethylene composites
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2014)The composites of chicken feather fiber (CFF)/recycled high density polyethylene (RHDPE), tyre dust (TD)/recycled high density polyethylene (R-HDPE), and hybrid fillers composite between chicken feather fiber (CFF)/tyre ... -
Properties of chitosan-filled polypropylene (PP) composites: The effect of acetic acid
(Taylor and Francis Group, LLC, 2012-01)The main objective of this research was to investigate the effect of chitosan content and chemical modification with acetic acid on mechanical and thermal properties of PP/Chitosan. It was found that the tensile strength, ... -
Properties of Chitosan/Halloysite nanotubes composites films
(Universiti Malaysia Perlis (UniMAP)School of Materials Engineering, 2016-06) -
Properties of CNTs/Calcium Carbonate filled polymer composites
(Universiti Malaysia Perlis (UniMAP), 2017-06)In the present work, the properties of the synthesized hybrid carbon nanotube-calcium carbonate (CNTs-CaCO3), prepared via chemical vapor deposition and a physically mixed CNTs-CaCO3 filled epoxy composites, at various ... -
Properties of coconut shell powder-filled polylactic acid ecocomposites: Effect of maleic acid
(Society of Plastics Engineers, 2013-05)Ecocomposites were produced by incorporating coconut shell powder (CSP) into polylactic acid (PLA) resin. The effect of filler content and chemical modification on the mechanical properties, thermal properties, and morphology ... -
Properties of concrete containing guava seed
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2013-06)This project presents the result of experiment to produce concrete cube containing guava seed as sand replacement. The guava seed was used as part of sand replacement in the mix of concrete. Forty eight concrete cubes with ... -
Properties of concrete containing rice husk ash under sodium chloride subjected to wetting and drying
(Elsevier B.V., 2012)In this study, the influences of different replacement levels of RHA blended cement concrete subjected to 5% NaCl solution with drying-wetting cycles was evaluated. For parametric study, RHA was used as a Portland cement ... -
Properties of concrete made from lightweight aggregate under different curing time
(Universiti Malaysia Perlis (UniMAP)School of Environmental Engineering, 2014-06)Nowadays, construction either in building and infrastructure is mushrooming until cause high demand of consumption raw materials and this was led high competitive and shortage of natural resources in some part of the world. ... -
Properties of concrete with different percentange of the rice husk ash (RHA) as partial cement replacement
(Trans Tech Publications Ltd, 2015)The use of pozzolanic material from waste product as partial cement replacement in concrete contribute to reduce the environmental, economic problem through their waste and as well enhance the strength and properties of ...