1. UniMAP Library Digital Repository
  2. The Library
  3. Conference Papers
Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/9891
Title: Design and analysis of an UTeM antenna
Authors: Dalila, Misman
Mohamad Zoinol A., Abdul Aziz
Soh, Ping Jack
R. Badlishah, Ahmad, Assoc. Prof. Dr.
Keywords: UTeM antenna
Microwave office software
Microwave studios
Antenna design
Issue Date: 12-Apr-2010
Publisher: Institute of Electrical and Elctronics Engineering (IEEE)
Citation: p.1-4
Series/Report no.: Proceedings of the 4th European Conference on Antennas and Propagation (EuCAP) 2010
Abstract: Meander line antenna design with parasitic element was investigated. The overall antenna design structure referred to the UTeM logo. This antenna has been designed to operate at 2.4GHz which are specified by IEEE 802.11b/g for WLAN. The antenna designed has been done for both microstrip and planar type. Microwave Studio CST Microwave Office software was used for the simulation processed. The antenna was fabricated on a double-sided FR-4 printed circuit board using an etching technique and SMA connector for the feed port. Then, the design has been measured with the Agilent Network Analyzer. The comparison between simulation and measurement results for the return loss and radiation patterns were presented. The Planar UTeM Antenna has a gain of 3dB, with a frequency bandwidth of 70MHz.
Description: Link to publisher's homepage at http://ieeexplore.ieee.org/
URI: http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=05505308
http://dspace.unimap.edu.my/123456789/9891
ISBN: 978-8-4765-3472-4
Appears in Collections:Conference Papers
R. Badlishah Ahmad, Prof. Ir. Ts. Dr.
Soh Ping Jack, Assoc. Prof. Dr.

Files in This Item:
File Description SizeFormat 
Design and analysis of an UTeM antenna.pdf41.53 kBAdobe PDFView/Open
Show full item record


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.