Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/80235
Full metadata record
DC FieldValueLanguage
dc.contributor.authorFarayola, Olanrewaju-
dc.contributor.authorOdili, Cletus Chiosa-
dc.contributor.authorOlaleye, Samuel Adebayo-
dc.contributor.authorOyekeye, Manasseh O.-
dc.contributor.authorOchulor, Ezenwanyi Fidelia-
dc.contributor.authorGbenebor, Oluwashina Philips-
dc.contributor.authorBio-Sketch, Samson Oluropo Adeosun-
dc.date.accessioned2024-03-04T07:50:27Z-
dc.date.available2024-03-04T07:50:27Z-
dc.date.issued2022-
dc.identifier.citationThe Journal of the Institution of Engineers, Malaysia, vol.83 (1), 2022, pages 15-21en_US
dc.identifier.issn0126-513x-
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/80235-
dc.descriptionLink to publisher’s homepages at https://www.myiem.org.my/en_US
dc.description.abstractSevere plastic deformation (SPD) is a technique used to obtain ultra-fine grains (UFGs). However, this technology is expensive and time-consuming. In this study, the conventional deformation technique is used to examine the deformation responses of extruded zinc alloy to achieve fine grain structure by varying die entry angles. Zinc alloy samples were cast into cylindrical billets in sand mould, the samples were machined and tapered at the edge to ease entry into the die for the extrusion process. The die and tools materials were made of mild steel with die entry angles of 15o, 30o, 45o, 60o, 75o, and 90o. Prior to extrusion, the samples were annealed at 400°C because of their hexagonal close-packed (HCP) structure to ease deformation. After annealing, the plastic deformation of alloy samples occurred at 350°C. The extrusion was performed with the aid of a hydraulic press machine that applied pressure on a cylindrical punch and forced the billet through the extrusion die. The results show that the extruded zinc alloy has the highest extrusion stress of 192MPa at 45° die entry angle with fine grains neatly distributed in the matrix and at a 60° die entry angle, the tensile strength and hardness are 177MPa and 95HV respectively with improved ductility. The microstructure of zinc alloy shows equally distributed dendrite-like second-phase intermetallic in the matrix.en_US
dc.language.isoenen_US
dc.publisherThe Institution of Engineers, Malaysia (IEM)en_US
dc.subject.otherAnnealingen_US
dc.subject.otherDeformationen_US
dc.subject.otherDiesen_US
dc.subject.otherExtrusionen_US
dc.subject.otherGrain Boundaryen_US
dc.subject.otherIntermetallicen_US
dc.titleDeformation responses of extruded zinc alloyen_US
dc.typeArticleen_US
dc.identifier.urlhttps://www.myiem.org.my/-
dc.contributor.urloogodman@gmail.comen_US
Appears in Collections:IEM Journal

Files in This Item:
File Description SizeFormat 
Deformation responses of extruded zinc alloy.pdfMain article1.36 MBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.