Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/75813
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lim, G. D. | - |
dc.contributor.author | M. J., Abd Latif | - |
dc.contributor.author | M. R., Alkahari | - |
dc.contributor.author | M. S., Yob | - |
dc.contributor.author | M., Musa | - |
dc.contributor.author | M. N., Abdul Rahman | - |
dc.contributor.author | P., Rajaandra | - |
dc.contributor.author | Nguyen, H. Q. | - |
dc.contributor | Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka (UTeM) | en_US |
dc.contributor | Advanced Manufacturing Centre (AMC), Universiti Teknikal Malaysia Melaka (UTeM) | en_US |
dc.contributor | PERKESO Rehabilitation Center | en_US |
dc.contributor | Institute of Engineering and Technology, Thu Dau Mot University | en_US |
dc.creator | M. J., Abd Latif | - |
dc.date | 2022 | - |
dc.date.accessioned | 2022-08-07T03:41:48Z | - |
dc.date.available | 2022-08-07T03:41:48Z | - |
dc.date.issued | 2022-03 | - |
dc.identifier.citation | International Journal of Nanoelectronics and Materials, vol.15 (Special Issue), 2022, pages 247-258 | en_US |
dc.identifier.issn | 1997-4434 (Online) | - |
dc.identifier.issn | 1985-5761 (Printed) | - |
dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/75813 | - |
dc.description | Link to publisher's homepage at http://ijneam.unimap.edu.my | en_US |
dc.description.abstract | Prosthetic socket plays the most important role in lower limb prosthesis. The conventional fabrication process of prosthetic socket is labor intensive and time-consuming. The application of additive manufacturing technology may greatly simplify the process. One of the main concerns on the reliability of 3D printed prosthetic socket is its structural strength due to the various 3D printing parameters that may influence the strength of 3D printed products. Furthermore, most of the previous studies focused on single parameter and the effect on socket strength. Thus, this study aimed to examine the optimization of fused deposition modeling printing parameter of 3D printed prosthetic socket in term of strength, fabrication time and weight. Three FDM printing parameters were studied which included layer height, nozzle diameter and infill percentage. The data was analyzed using Taguchi and PCR-TOPSIS methods. Based on the result, it was concluded that the most effective combination of printing parameter is 1.0 mm nozzle diameter, 0.48 mm layer height and 30% infill percentage. In addition, infill percentage shown the highest influence towards the responsive values followed by layer height and nozzle diameter. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.relation.ispartofseries | Special Issue ISSTE 2022; | - |
dc.subject.other | Prosthetic socket | en_US |
dc.subject.other | Fused deposition modelling | en_US |
dc.subject.other | 3D printing | en_US |
dc.subject.other | PCR-TOPSIS | en_US |
dc.title | Parameter optimization of fused deposition modeling process for 3D printed prosthetic socket using PCR-TOPSIS method | en_US |
dc.type | Article | en_US |
dc.identifier.url | http://ijneam.unimap.edu.my | - |
dc.contributor.url | juzaila@utem.edu.my | en_US |
Appears in Collections: | International Journal of Nanoelectronics and Materials (IJNeaM) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Vol_15_SI_March_2022_247-258.pdf | Main article | 1.27 MB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.