Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/75731
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSuraini, Sulaiman-
dc.date.accessioned2022-07-01T02:43:44Z-
dc.date.available2022-07-01T02:43:44Z-
dc.date.issued2014-06-
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/75731-
dc.descriptionAccess is limited to UniMAP community.en_US
dc.description.abstractThe research project conducted was to produce and characterize the TiO2 photo-anode via sol-gel method which was carried out by the addition of several chemicals ranging from the precursor solution, the chelating agent, solvent and the pore templating agent. The chemicals involved in the production of Sol for the dip coating process were the Titanium (IV) Isopropoxide, ethanol, acetic, acid and Triton X-100. In this research, dip coating technique was applied to coat a thin layer of TiO2 onto a conductive substrate that can be used in the photoelectrochemical cell (PEC) for hydrogen sequestration The substrates selected were the fluorine doped tin oxide (FTO) glass which allows the current to flow through it. The sol-gel dip coating methods are carried out in different temperature, different concentration and different number of layers. The temperatures were ranged from 75 °C, 45 °C, 30 °C and room temperature. The layers coated were from 1 layer, 3 layers, and 5 layers. The annealing temperatures of the photo-anodes were 400 °C. The substrates were continuously heated in the furnace for 10 minutes for each of the layers coated onto the FTO substrate. The analysis conducted by using UV-VIS analysis to test for the wavelength and the three point probe tests for the Current Voltage Analysis. From the analysis, the best photo-anode produced were from the 20% ethanol concentration, 5 layers of TiO2 coating and the sol were being produced at room temperature of 23-24 °C.en_US
dc.language.isoenen_US
dc.publisherUniversiti Malaysia Perlis (UniMAP)en_US
dc.subject.otherTio2 sol solutionen_US
dc.subject.otherHydrogen (H2)en_US
dc.subject.otherPrecursor solutionen_US
dc.titleThe production and characterization of Tio2 photo anode via sol-gel methoden_US
dc.typeOtheren_US
dc.contributor.advisorUmi Fazara, Md. Ali-
Appears in Collections:School of Environmental Engineering (FYP)

Files in This Item:
File Description SizeFormat 
Abstract,acknowledgement.pdfAbstract, Acknowledgement89.07 kBAdobe PDFView/Open
Introduction.pdfIntroduction109.66 kBAdobe PDFView/Open
Literature Review.pdfLiterature Review527.6 kBAdobe PDFView/Open
Methodology.pdfMethodology396.7 kBAdobe PDFView/Open
Result and Discussion.pdfResult and Discussion820.06 kBAdobe PDFView/Open
Conclusion and Recommendation.pdfConclusion, and Recommendations106.36 kBAdobe PDFView/Open
Refference and Appendics.pdfReferences and Appendices150.97 kBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.