1. UniMAP Library Digital Repository
  2. Researchers
  3. Noorina Hidayu Jamil, Madam
Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/74715
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNoorina Hidayu, Jamil-
dc.contributor.authorMohd Mustafa Al Bakri, Abdullah-
dc.contributor.authorFaizul, Che Pa-
dc.contributor.authorHasmaliza, Mohamad-
dc.contributor.authorWan Mohd Arif, W. Ibrahim-
dc.contributor.authorIkmal Hakem, Aziz-
dc.contributor.authorJeż, Bartłomiej-
dc.contributor.authorNabiałek, Marcin-
dc.contributorCenter of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP)en_US
dc.contributorFaculty of Mechanical Engineering Technology, Universiti Malaysia Perlis (UniMAP)en_US
dc.contributorSchool of Materials and Mineral Resources Engineering, Universiti Sains Malaysia (USM)en_US
dc.contributorDepartment of Physics, Częstochowa University of Technologyen_US
dc.creatorNoorina Hidayu, Jamil-
dc.creatorJeż, Bartłomiej-
dc.date2022-
dc.date.accessioned2022-03-17T07:47:02Z-
dc.date.available2022-03-17T07:47:02Z-
dc.date.issued2021-02-
dc.identifier.citationMagnetochemistry, vol.7(3), 2021, 13 pagesen_US
dc.identifier.issn2312-7481-
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/74715-
dc.descriptionLink to publisher's homepage at https://www.mdpi.com/en_US
dc.description.abstractThe main objective of this research was to investigate the influence of curing temperature on the phase transformation, mechanical properties, and microstructure of the as-cured and sintered kaolin-ground granulated blast furnace slag (GGBS) geopolymer. The curing temperature was varied, giving four different conditions; namely: Room temperature, 40, 60, and 80 °C. The kaolin-GGBS geopolymer was prepared, with a mixture of NaOH (8 M) and sodium silicate. The samples were cured for 14 days and sintered afterwards using the same sintering profile for all of the samples. The sintered kaolin-GGBS geopolymer that underwent the curing process at the temperature of 60°C featured the highest strength value: 8.90 MPa, and a densified microstructure, compared with the other samples. The contribution of the Na2O in the geopolymerization process was as a self-fluxing agent for the production of the geopolymer ceramic at low temperatures.en_US
dc.language.isoenen_US
dc.publisherMDPI AGen_US
dc.subject.otherKaolinen_US
dc.subject.otherGGBSen_US
dc.subject.otherSintering geopolymeren_US
dc.subject.otherSelf-fluxingen_US
dc.titlePhase Transformation of Kaolin-Ground Granulated Blast Furnace Slag from Geopolymerization to Sintering Processen_US
dc.typeArticleen_US
dc.identifier.doihttps://doi.org/10.3390/magnetochemistry7030032-
dc.contributor.urlnoorinahidayu@unimap.edu.myen_US
dc.contributor.urlbartek199.91@o2.plen_US
Appears in Collections:Noorina Hidayu Jamil, Madam

Files in This Item:
File Description SizeFormat 
Phase Transformation of Kaolin.pdfMain article4.97 MBAdobe PDFView/Open
Show simple item record


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.