1. UniMAP Library Digital Repository
  2. Researchers
  3. Liyana Jamaludin
Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/74624
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLiyana, Jamaludin-
dc.contributor.authorMohd Mustafa Al Bakri, Abdullah-
dc.contributor.authorKamarudin, Hussin-
dc.contributor.authorAeslina, Abdul Kadir-
dc.contributorCenter of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis (UniMAP)en_US
dc.contributorFaculty of Engineering Technology, Universiti Malaysia Perlis (UniMAP)en_US
dc.contributorFaculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia (UTHM)en_US
dc.creatorLiyana, Jamaludin-
dc.date2022-
dc.date.accessioned2022-03-10T08:48:11Z-
dc.date.available2022-03-10T08:48:11Z-
dc.date.issued2018-06-
dc.identifier.citationIOP Conference Services: Material Sciences Engineering, vol.374, 2018, 5 pagesen_US
dc.identifier.issn1757-899x (online)-
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/74624-
dc.descriptionLink to publisher's homepage at https://iopscience.iop.org/en_US
dc.description.abstractThe study focus on effect of pre-heated ceramic surface on the adhesion bond strength between geopolymer coating coating and ceramic substrates. Ceramic substrates was pre-heated at different temperature (400 °C, 600 °C, 800 °C and 1000 °C). Fly ash geopolymer coating material potential used to protect surface used in exposure conditions after sintering at high temperature. Fly ash and alkali activator (Al2O3/Na2SiO3) were mixed with 2.0 solids-to-liquid ratios to prepare geopolymer coating material at constant NaOH concentration of 12M. Adhesion test was conducted to determine the adhesion bond between ceramic substrates and fly ash coating material. The results showed the pre-heated ceramic substrates effect the adhesion bond of coating compared with untreated substrates with increasing of strength up to 20 % for temperature 600 °C.en_US
dc.language.isoenen_US
dc.publisherIOP Publishing Ltden_US
dc.subject.otherGeopolymersen_US
dc.subject.otherGeopolymer ceramicen_US
dc.subject.otherFly ashen_US
dc.titleThe influence of pre-heated treatment to improve adhesion bond coating strength of fly ash based geopolymer ceramicen_US
dc.typeArticleen_US
dc.identifier.doihttps://doi.org/10.1088/1757-899x/374/1/012046-
dc.contributor.urlliyanajamaludin@unimap.edu.myen_US
Appears in Collections:Liyana Jamaludin
Mohd Mustafa Al Bakri Abdullah, Prof. Dr.
Kamarudin Hussin, Brig. Jen. Datuk Prof. Dr.

Files in This Item:
File Description SizeFormat 
The Influence of Pre-Heated Treatment to Improve Adhesion.pdfMain article257.34 kBAdobe PDFView/Open
Show simple item record


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.