Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/7257
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Khaleed, H.M.T. | - |
dc.contributor.author | Z., Samad | - |
dc.contributor.author | A.R., Othman | - |
dc.contributor.author | M.A., Mujeebu | - |
dc.contributor.author | Hussaini, A. | - |
dc.contributor.author | A.B., Abdullah | - |
dc.contributor.author | Magami, I.B. | - |
dc.contributor.author | Salman Ahmed, N.J. | - |
dc.contributor.author | Quadir, G.A. | - |
dc.contributor.author | Jeevan, Kanesan | - |
dc.date.accessioned | 2009-11-13T01:13:54Z | - |
dc.date.available | 2009-11-13T01:13:54Z | - |
dc.date.issued | 2009-10-11 | - |
dc.identifier.citation | p.10B 1 - 10B 7 | en_US |
dc.identifier.isbn | 978-967-5415-07-4 | - |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/7257 | - |
dc.description | Organized by School of Mechatronic Engineering (UniMAP) & co-organized by The Institution of Engineering Malaysia (IEM), 11th - 13th October 2009 at Batu Feringhi, Penang, Malaysia. | en_US |
dc.description.abstract | In this paper three-dimensional FEM analysis and experimental flashless cold forging of aluminum front and back hubs of Autonomous Underwater Vehicle (AUV) propeller is presented. The rigid-plastic finite element simulation is performed using DEFORM F-3V6.0, to estimate the optimum load required for the flashless cold forging. The complex profiles of the hubs are modeled using SOLIDWORKS SP4.02007 which is used for the modeling of work-piece and die-punch assembly as well. The work-piece used is of AISI AL6061 and the die material is die steel (AISI D2). The process is optimized to form the propeller back and front hubs. For both the models, three workpieces with different aspect ratios are selected and investigated to obtain the optimum workpiece that gives flashless cold forging with acceptable underfilling. Based on the simulation results, the flash-less cold forging is successfully done on a 100 ton C-type machine. The experimental forged samples are observed in good conformity with the simulated models. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis | en_US |
dc.relation.ispartofseries | Proceedings of International Conference on Applications and Design in Mechanical Engineering 2009 (ICADME 2009) | en_US |
dc.subject | Flashless cold forging | en_US |
dc.subject | Underfilling | en_US |
dc.subject | AUV propeller | en_US |
dc.subject | Front and back hubs | en_US |
dc.subject | Work-piece optimization | en_US |
dc.subject | Forging | en_US |
dc.subject | Metals -- Extrusion | en_US |
dc.subject | Submersibles | en_US |
dc.title | FEM analysis and experimental validation of flashless cold forging of autonomous underwater vehicle hubs | en_US |
dc.type | Working Paper | en_US |
dc.contributor.url | khalid_tan@yahoo.com | en_US |
Appears in Collections: | Conference Papers Ghulam Abdul Quadir, Prof. Dr. |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
FEM Analysis and Experimental Validation of Flashless.pdf | Access is limited to UniMAP community. | 496.61 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.