Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/4916
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Nur Amalina Ahmad | - |
dc.date.accessioned | 2009-03-05T11:06:50Z | - |
dc.date.available | 2009-03-05T11:06:50Z | - |
dc.date.issued | 2008-03 | - |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/4916 | - |
dc.description.abstract | This aim of study is to characterize the physical properties manufactured aggregates that produces from waste, which is fly ash. In this study an attempt has been made to find the suitability of the fly ash waste and reinforced by kaolin and cement as a possible replacement for the conventional aggregates as coarse aggregates. Following the series of raw material mixture, 12 samples of aggregates were manufacture to find the suitable mixing of raw material for producing the required aggregates properties. The palletizing process using the palletizing machine conducted the manufacturing step. This thesis involves a comparative analysis in water absorption and bulk density measurement for the aggregates. After the basic physical properties were establish a micro analysis by using Scanning Electron Analysis were carried for the two samples A8 and A10 because of their better properties and followed by Energy Dispersion Spectrometer for chemical composition investigation. Samples A8 and A10 were then use in testing for concrete. Finally, the results of compressive strength of the cube of concrete were analyzed to determine the strength and hardness of the manufactured aggregates. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis | en_US |
dc.subject | Waste products | en_US |
dc.subject | Waste products as a building materials | en_US |
dc.subject | Fly ash | en_US |
dc.subject | Aggregates (Building materials) | en_US |
dc.subject | Aggregates (Building materials) -- Design and construction | en_US |
dc.title | The production of fly ash aggregates | en_US |
dc.contributor.advisor | Khairul Nizar Ismail, Dr. (Advisor) | en_US |
dc.publisher.department | School of Materials Engineering | en_US |
Appears in Collections: | School of Materials Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
References and appendix.pdf | 1.39 MB | Adobe PDF | View/Open | |
Conclusion.pdf | 70.34 kB | Adobe PDF | View/Open | |
Results and discussion.pdf | 1.73 MB | Adobe PDF | View/Open | |
Methodology.pdf | 443.94 kB | Adobe PDF | View/Open | |
Literature review.pdf | 374.28 kB | Adobe PDF | View/Open | |
Introduction.pdf | 75.48 kB | Adobe PDF | View/Open | |
Abstract, Acknowledgement.pdf | 100.24 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.