Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/48395
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Nur Hazwani, Mohd Yusoff | - |
dc.date.accessioned | 2017-05-26T09:13:11Z | - |
dc.date.available | 2017-05-26T09:13:11Z | - |
dc.date.issued | 2016-06 | - |
dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/48395 | - |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | This experiment was carried out to study the effect of high weight percent of space holder on porosity and microstructure of aluminum foam manufactured by Sintering-Dissolution Process (SDP). SDP consist of mixing, compacting, sintering and also dissolution process. In this study, aluminum (Al) and sodium chloride (NaCl) were mixed together to produce a homogeneous mixture. The composition of space-holder (NaCl) content is 45%, 55%, 65%, and 75%. Mixture powder was compressed according to compaction pressure 200MPa at room temperature and then was sintered for 2 hours. The sintered sample were removed from the furnace and placed it into warm, running water stream for 45 minutes to dissolves the spaceholder content (NaCl) particles embedded in the aluminum matrices. From the results, the spaceholder content can affect the total porosity of the sintered aluminum. The higher space-holder content, the higher porosity can be achieved. The porous aluminum with 75% of space-holder produces highest value of porosity which is 74% of porosity. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.subject | Sintering-dissolution process (SDP) | en_US |
dc.subject | Aluminum foam | en_US |
dc.subject | Porosity | en_US |
dc.subject | Porous metal | en_US |
dc.subject | Porous metal -- Analysis | en_US |
dc.title | Effect of high weight percent of space holder on porosity and microstructure of aluminum foam manufactured by sintering-dissolution process (SDP) | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Prof. Dr. Shamsul Baharin Jamaludin | en_US |
dc.publisher.department | School of Materials Engineering | en_US |
Appears in Collections: | School of Materials Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Abstract,Acknowledgement.pdf | 150.62 kB | Adobe PDF | View/Open | |
Introduction.pdf | 170.9 kB | Adobe PDF | View/Open | |
Literature Review.pdf | 579.08 kB | Adobe PDF | View/Open | |
Methodology.pdf | 171.93 kB | Adobe PDF | View/Open | |
Results and Discussion.pdf | 1.15 MB | Adobe PDF | View/Open | |
Conclusion and Recommendation.pdf | 138.68 kB | Adobe PDF | View/Open | |
Refference and Appendics.pdf | 199.37 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.