Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/48073
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMohd Azrisyazwan, Zainuddin-
dc.date.accessioned2017-05-12T03:37:34Z-
dc.date.available2017-05-12T03:37:34Z-
dc.date.issued2016-06-
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/48073-
dc.descriptionAccess is limited to UniMAP community.en_US
dc.description.abstractThis present study is to investigate the reduction of iron oxide with metallurgical coke and graphite used in this project. The purpose of this study mainly was to investigate the possibilities of reducing hematite to metallic iron. The iron oxide with graphite and coke reduction occurred in stepwise of hematite (Fe2O3) to magnetite (Fe3O4), and to metallic iron (Fe) respectively. The reducing agent, metallurgical coke and graphite play a major role in reduction behavior study. Three different proportions were undergoes reduction process in horizontal tube furnace with nitrogen gas flow at high temperature (950°C) reactions with difference soaking time of 60 minutes, 120 minutes and 180 minutes. The reduction were determined by X-ray Diffraction (XRD) analyzed, X-ray Diffraction (XRF) analyzed with Scanning Electron Microscope and Energy dispersive spectrometry (SEM/EDS). The iron oxide were founded in XRD and EDS pattern.. XRD pattern detected hematite peaks at before reduction changes to magnetite after reduction were done. Thus, based on result presented by XRD, SEM and EDS analysis the reducing percentage of iron oxide with graphite and coke; reduction performance were improved as well.en_US
dc.language.isoenen_US
dc.publisherUniversiti Malaysia Perlis (UniMAP)en_US
dc.subjectIron oxideen_US
dc.subjectMetallurgical cokeen_US
dc.subjectGraphiteen_US
dc.subjectMaterials engineeringen_US
dc.subjectBlast furnaceen_US
dc.subjectReductionen_US
dc.titleObservation on the reduction of Iron Oxide by graphite and cokeen_US
dc.typeLearning Objecten_US
dc.contributor.advisorDr. Nur Farhana Diyana Mohd Yunosen_US
dc.publisher.departmentSchool of Materials Engineeringen_US
Appears in Collections:School of Materials Engineering (FYP)

Files in This Item:
File Description SizeFormat 
Abstract,Acknowledgement.pdf300.64 kBAdobe PDFView/Open
Introduction.pdf497.76 kBAdobe PDFView/Open
Literature Review.pdf685.6 kBAdobe PDFView/Open
Methodology.pdf765.51 kBAdobe PDFView/Open
Results and Discussion.pdf1.65 MBAdobe PDFView/Open
Conclusion and Recommendation.pdf206.85 kBAdobe PDFView/Open
Refference and Appendics.pdf318.98 kBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.