Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/43804
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNurliyana, Mohd Rosli
dc.contributor.authorNur Maizatul Shima, Adzali
dc.contributor.authorWan Abd. Rahman Assyahid, Wan Ibrahim
dc.contributor.authorMohd Zamzuri, Mohammad Zain
dc.contributor.authorAzmi, Harun
dc.date.accessioned2016-10-25T09:03:00Z
dc.date.available2016-10-25T09:03:00Z
dc.date.issued2014
dc.identifier.citationApplied Mechanics and Materials, vol.627, 2014, pages 18-23en_US
dc.identifier.issn1662-7482
dc.identifier.urihttp://www.scientific.net/AMM.627.18
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/43804
dc.identifier.uriwww.scientific.net/AMM.627.18en_US
dc.descriptionLink to publisher's homepage at http://www.scientific.neten_US
dc.description.abstractMicrowave heating technology promising shorter processing times and less energy consumption beneficial for economic perspective with improved properties and better microstructural control. This study focussed on microwave sintered bioceramics material of 60YSZAl2O3/ 10HAP mixture fabricated by powder metallurgy route. The study was conducted based on three different sintering temperatures, starting with 900˚C, 1000°C ended with 1100°C. Mechanical properties of materials such as porosity, density, hardness and compressive strength were then determined for each composites. Results showed that lowest porosity was obtained at 1000°C which promoting to higher density, hardness and compressive strength. However, the increasing sintering temperature up to 1100 ˚C was initiated the decomposition of HAP and constitutes the formation of CaZrO3 determined by X-ray Diffraction (XRD) analysis. Microstructure characterization by Scanning Electron Microscope (SEM) observed the growth of large particles and pores result in excessive grain coarsening. Better sinterability was achieved through an adequate sintering temperature of 1000°C with no reaction reported between HA and ZrO2 during the sintering process facilitate by microwave hybrid heating. The pores was found to be interconnected for each composites via microwave heating expected to be useful for biomedical application which was favorable to osteo-integration.en_US
dc.language.isoenen_US
dc.publisherTrans Tech Publicationsen_US
dc.subjectAluminaen_US
dc.subjectHydroxyapatiteen_US
dc.subjectMicrowave sinteringen_US
dc.subjectYttria- stabilized zirconiaen_US
dc.titleMechanical properties of microwave sintered 60YSZAl₂0₃/10HAP bioceramics compositesen_US
dc.typeArticleen_US
dc.identifier.doi10.4028/www.scientific.net/AMM.627.18
dc.contributor.urlnurliyana.rosli13@gmail.comen_US
dc.contributor.urlshima@unimap.edu.myen_US
dc.contributor.urlwarawi@unimap.edu.myen_US
dc.contributor.urlmzamzuri@unimap.edu.myen_US
dc.contributor.urlazmiharun@unimap.edu.myen_US
Appears in Collections:Azmi Harun,Ts.
Wan Abdul Rahman Assyahid Wan Ibrahim, Dr.
Mohd Zamzuri Mohammad Zain, Dr.
Nur Maizatul Shima, Adzali, Dr.

Files in This Item:
File Description SizeFormat 
Mechanical properties of microwave sintered.pdf182.78 kBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.