Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/41831
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Muhammad Taufiq, Jusop | - |
dc.date.accessioned | 2016-06-02T09:28:03Z | - |
dc.date.available | 2016-06-02T09:28:03Z | - |
dc.date.issued | 2015-06 | - |
dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/41831 | - |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | Designing and constructing a circularly polarized microstrip patch antenna at GSM band is the main objective in this project. The design of this antenna is made by using CST Design Microwave 2010. The antenna consists of three layers which are the ground, substrates and patch. Ground plane and patch are made from copper while the substrate is from Rogers 5880. In this project, the design that had been fabricated is rectangular patch antenna at a frequency 1.8 GHz. To produce a circular polarization antenna, the opposite edges of the patch need to be truncated. Based on the simulation result, circularly polarized characteristics for the design were achieved due to axial ratio value that is below than 3dB. The return loss of the microstrip antenna at the fundamental frequency is below than -10dB for an effective antenna. All the parameters such as return loss, input impedance, axial ratio, and also VSWR were measured to fulfilled the antenna requirement for the best performance. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.subject | Microstrip patch antenna | en_US |
dc.subject | Antennas | en_US |
dc.subject | Polarized microstrip patch antenna -- Design and construction | en_US |
dc.subject | Circular polarization antenna | en_US |
dc.subject | GSM band | en_US |
dc.title | Circularly polarized microstrip patch antenna at GSM band | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Dr. Rosemizi Abd. Rahim | en_US |
dc.publisher.department | School of Computer and Communication Engineering | en_US |
Appears in Collections: | School of Computer and Communication Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Abstract,Acknowledgement.pdf | 647.54 kB | Adobe PDF | View/Open | |
Introduction.pdf | 181.07 kB | Adobe PDF | View/Open | |
Literature Review.pdf | 370.85 kB | Adobe PDF | View/Open | |
Methodology.pdf | 392.23 kB | Adobe PDF | View/Open | |
Results and Discussion.pdf | 291.83 kB | Adobe PDF | View/Open | |
Conclusion and Recommendation.pdf | 175.09 kB | Adobe PDF | View/Open | |
Refference and Appendics.pdf | 253.02 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.