Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/40654
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJuraida, Abu Bakar-
dc.date.accessioned2015-12-11T08:21:13Z-
dc.date.available2015-12-11T08:21:13Z-
dc.date.issued2014-05-
dc.identifier.urihttp://dspace.unimap.edu.my:80/xmlui/handle/123456789/40654-
dc.descriptionAccess is limited to UniMAP community.en_US
dc.description.abstractPalm Oil Fuel Ash (POFA) is one of the solid waste in Malaysia and had trouble in the ash removal. Therefore, the use of waste oil palm ash can overcome the problem of solid waste. Based on previous research, POFA is a pozzolana material and it can act as a replacement of cement (OPC) to produce concrete with higher strength and low cost. POFA quality will increase as the range made up to a medium level of fineness in the size of 50 microns. POFA used to replace OPC is 0%, 10%, 30% and 50% by weight percent of OPC. POFA concrete compressive strength will be tested after a curing process that concrete age of 7 days and 28 days. POFA concrete density is also tested and compared with OPC concrete. Results showed that compressive strength POFA lower than normal concrete. On the other hand, the replacement of cement by 10% POFA shows a record high in compressive strength compared with other POFA mixing at the age of 7 days and 28 days. Fineness pozolana POFA is the best material and can be used as a cement replacement alternative. POFA 10 % and 30 % suggested as enhancing cement replacer to obtain high compressive strength results in experiments.en_US
dc.language.isoenen_US
dc.publisherUniversiti Malaysia Perlis (UniMAP)en_US
dc.subjectPalm oil fuel ash (POFA)en_US
dc.subjectSolid wasteen_US
dc.subjectConcreteen_US
dc.subjectAsh removalen_US
dc.subjectReplacement of cement (OPC)en_US
dc.titlePerformance of concrete by using palm oil fuel ash (POFA) as a cement replacement materialen_US
dc.typeLearning Objecten_US
dc.contributor.advisorLiyana Ahmad Sofrien_US
dc.publisher.departmentSchool of Environmental Engineeringen_US
Appears in Collections:School of Environmental Engineering (FYP)

Files in This Item:
File Description SizeFormat 
Abstract, Acknowledgement.pdf89.78 kBAdobe PDFView/Open
Introduction.pdf75.33 kBAdobe PDFView/Open
Literature review.pdf253.41 kBAdobe PDFView/Open
Methodology.pdf152.73 kBAdobe PDFView/Open
Results and discussion.pdf399.08 kBAdobe PDFView/Open
Conclusion.pdf65.53 kBAdobe PDFView/Open
Reference and appendix.pdf242.63 kBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.