Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/40649
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Muhammad Alffi Fairroz, Wahab | - |
dc.date.accessioned | 2015-12-11T07:56:58Z | - |
dc.date.available | 2015-12-11T07:56:58Z | - |
dc.date.issued | 2014-06 | - |
dc.identifier.uri | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/40649 | - |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | This project is about the research of behavior distributed axial load on the sand Palm Oil Clinker (POC) brick wall. In this study, POC bricks were self-made in the laboratory. There are three samples of the bricks compared which are clay brick, sand brick and POC brick. The bricks tested using two test to identify strengths which are compressive strength and flexural strength. Next, this bricks will be arranged to produce brick walls using cement mortar. Firstly, mortar cubes were produced from a mortar concrete mixture for using in compression test to determine the strength of the mortar. Based on the results obtained in this investigation, POC brick recorded the lowest compressive strength of the three brick and does not meet the minimum compressive strength of 3.65 MPa for brick and 0.389 MPa flexural strength. Compressive strength of mortar cubes was increased with increasing the curing period. The conclusion that can be conclude about the behavior of the distributed axial loaded sand brick wall palm oil clinker is brick produced using POC aggregate cannot be used as a brick in the construction industry due to the compressive strength is not achieved the minimum of standard brick compressive strength. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.subject | Sand brickwall | en_US |
dc.subject | Palm Oil Clinker (POC) | en_US |
dc.subject | Bricks | en_US |
dc.subject | Brick walls | en_US |
dc.subject | Agricultural waste | en_US |
dc.title | Behavior of axially distributed loaded sand brickwall palm oil clinker | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Md Hadli Abu Hassan | en_US |
dc.publisher.department | School of Environmental Engineering | en_US |
Appears in Collections: | School of Environmental Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Abstract, Acknowledgement.pdf | 173.71 kB | Adobe PDF | View/Open | |
Introduction.pdf | 47.78 kB | Adobe PDF | View/Open | |
Literature review.pdf | 384.62 kB | Adobe PDF | View/Open | |
Methodology.pdf | 801.22 kB | Adobe PDF | View/Open | |
Results and discussion.pdf | 724.16 kB | Adobe PDF | View/Open | |
Conclusion.pdf | 43.61 kB | Adobe PDF | View/Open | |
Reference and appendix.pdf | 837.37 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.