Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/35976
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Mohd Azaman, Md Deros | - |
dc.contributor.author | Mohd Sapuan, Salit, Prof. Ir Dr. | - |
dc.contributor.author | Shamsuddin, Sulaiman, Prof. Dr. | - |
dc.contributor.author | Edi Syams, Zainudin, Prof. Madya Dr. | - |
dc.date.accessioned | 2014-07-02T01:51:05Z | - |
dc.date.available | 2014-07-02T01:51:05Z | - |
dc.date.issued | 2014-03 | - |
dc.identifier.citation | Materials & Design, vol.55, 2014, pages 381–386 | en_US |
dc.identifier.issn | 0261-3069 | - |
dc.identifier.uri | http://dspace.unimap.edu.my:80/dspace/handle/123456789/35976 | - |
dc.description | Link to publisher's homepage at http://www.elsevier.com/ | en_US |
dc.description.abstract | In this paper, a numerical analysis of in-cavity residual stress formation in the thin-walled parts of injection-moulded parts is presented by considering the residual stresses produced during the post-filling stage. Injection moulding of shallow thin-walled parts with a thickness of 0.7 mm was performed using lignocellulosic polymer composites (PP + 50 wt% wood), and the parts have been systematically investigated using simulation results from Autodesk MoldFlow Insight® software. In-cavity residual stresses constitute the primary stage for analysis because of the need to control the quality of moulded parts to prevent problems with shrinkage and warpage. The analysis showed that the cooling times and packing times had a less significant effect; nevertheless, the optimal levels that are required to be used in the moulding process for thin-walled parts yielded better results. The in-cavity residual stress results show that the stress variation across the thickness exhibits a high tensile stress at the part surface, which changes to a low tensile stress peak value close to the surface, with the core region experiencing a parabolic tensile stress peak. The optimum parameter ranges for obtaining the minimum in-cavity residual stresses are as follows: a mould temperature of 40–45 °C, a cooling time of 20–30 s, a packing pressure of 0.85Pinject, and a packing time of 15–20 s. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Elsevier | en_US |
dc.subject | Polymer composites | en_US |
dc.subject | Numerical analysis | en_US |
dc.subject | Lignocellulosic (wood) | en_US |
dc.title | Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts | en_US |
dc.type | Article | en_US |
dc.contributor.url | sapuan@upm.edu.my | en_US |
Appears in Collections: | School of Manufacturing Engineering (Articles) Mohd Azaman Md Deros, Dr. |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Numerical simulation analysis of the in-cavity residual stress.pdf | 218.83 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.