1. UniMAP Library Digital Repository
  2. Researchers
  3. Mohd Arif Anuar Mohd Salleh, Associate Professor Dr. Ir.
Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/35751
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMohd Arif Anuar, Mohd Salleh-
dc.contributor.authorMohd Mustafa Al Bakri, Abdullah-
dc.contributor.authorSandu, Andrei Victor-
dc.contributor.authorNorainiza, Saud-
dc.contributor.authorKamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.-
dc.contributor.authorMcDonald, Stuart D.-
dc.contributor.authorNogita, Kazuhiro-
dc.date.accessioned2014-06-20T08:29:20Z-
dc.date.available2014-06-20T08:29:20Z-
dc.date.issued2013-07-
dc.identifier.citationRevista de Chimie vol. 64(7), 2013, pages 725-728en_US
dc.identifier.issn0034-7752-
dc.identifier.urihttp://www.revistadechimie.ro/article_eng.asp?ID=3718-
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/35751-
dc.descriptionLink to publisher's homepage at http://syscom.ro/en_US
dc.description.abstractThe properties of Sn-0.7Cu solder bulk prepared via the powder metallurgy (PM) method were investigated and compared with solder bulk fabricated through casting. Distinct microstructures were observed in both PM and casting Sn-0.7Cu solder bulks. PM Sn-0.7Cu solder showed denser and finer Sn-grain structure, while cast Sn-0.7Cu showed larger Sn-rich dendrites with the presence of eutectic phase region. The mechanical performance of the solder bulk prepared with the PM technique was enhanced as it had higher microhardness value, UTS, and yield strength compared to the solder bulk prepared using the casting method. The solder wettability of the product was also increased using the PM method. Overall, the PM method can improve the mechanical and solderability properties of lead-free solder; therefore, it holds great potential as a new method for solder fabrication.en_US
dc.language.isoenen_US
dc.publisherSyscom 18 SRLen_US
dc.subjectIntermetallicsen_US
dc.subjectMechanicalen_US
dc.subjectMicrostructureen_US
dc.subjectPowder metallurgyen_US
dc.subjectSolderen_US
dc.subjectWettabilityen_US
dc.titleA comparative study of solder properties of Sn-0.7Cu lead-free solder fabricated via the powder metallurgy and casting methodsen_US
dc.typeArticleen_US
dc.contributor.urlarifanuar@unimap.edu.myen_US
dc.contributor.urlmustafa_albakri@unimap.edu.myen_US
dc.contributor.urlsav@tuiasi.roen_US
dc.contributor.urlnorainiza@unimap.edu.myen_US
dc.contributor.urlkamarudin@unimap.edu.myen_US
dc.contributor.urls.mcdonald1@uq.edu.auen_US
dc.contributor.urlk.nogita@uq.edu.auen_US
Appears in Collections:Norainiza Saud, Ts Dr.
Mohd Mustafa Al Bakri Abdullah, Prof. Dr.
Mohd Arif Anuar Mohd Salleh, Associate Professor Dr. Ir.
Kamarudin Hussin, Brig. Jen. Datuk Prof. Dr.

Files in This Item:
File Description SizeFormat 
A comparative study of solder properties of Sn-0.7Cu lead-free solder fabricated via the powder metallurgy and casting methods-abstrct.pdf58.82 kBAdobe PDFView/Open
A comparative study of solder properties of Sn-0.7Cu lead-free solder fabricated via the powder metallurgy and casting methods-e.pdfAccess is limited to UniMAP community236.38 kBAdobe PDFView/Open
Show simple item record


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.