Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/35320
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Mohd Nor Hakim, Hassan | |
dc.contributor.author | Mohammad Ikhwan Zaini, Ridzwan | |
dc.contributor.author | Zainal Arifin, Ahmad, Prof. | |
dc.contributor.author | Mohd Mustafa Al Bakri, Abdullah | |
dc.contributor.author | Azman, Ahmad Bakir | |
dc.contributor.author | Mazlan, Mohamed | |
dc.date.accessioned | 2014-06-10T07:45:44Z | |
dc.date.available | 2014-06-10T07:45:44Z | |
dc.date.issued | 2013-09 | |
dc.identifier.citation | Advanced Materials Research, vol. 795, 2013, pages 597-602 | en_US |
dc.identifier.issn | 1022-6680 (Print) | |
dc.identifier.issn | 1662-8985 (Online) | |
dc.identifier.uri | http://www.scientific.net/AMR.795.597 | |
dc.identifier.uri | http://dspace.unimap.edu.my:80/dspace/handle/123456789/35320 | |
dc.description | Link to publisher's homepage at http://www.ttp.net/ | en_US |
dc.description.abstract | The main goal of this work is to investigate the performance of zirconia toughened alumina (ZTA) and ZTA reinforced with magnesium oxide (MgO) used as cutting insert in end milling of AISI 1018 steel with hardness of 27 HRC. Performances of the cutting insert were compared according to tool life and surface finish of workpiece. Insert flank wear that indicates tool life was studied carefully using Optical 3D Surface Metrology while surface roughness values were evaluated using Surftest Sufrcom 130A. The cutting inserts failed to exhibit good performance in end milling operation. However, wear condition and magnitude of the ZTA reinforced with MgO insert was slightly better than ZTA insert. Addition of MgO may increase wear resistance. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Trans Tech Publications | en_US |
dc.subject | Alumina insert | en_US |
dc.subject | Ceramic cutting tools | en_US |
dc.subject | End milling | en_US |
dc.subject | ZTA insert | en_US |
dc.title | Machining performance of reinforced alumina insert in end milling of AISI 1018 steel | en_US |
dc.type | Article | en_US |
dc.identifier.url | 10.4028/www.scientific.net/AMR.795.597 | |
dc.contributor.url | mn.hakim@ppinang.uitm.edu.my | en_US |
dc.contributor.url | mikhwanr@eng.usm.my | en_US |
dc.contributor.url | zainal@eng.usm.my | en_US |
dc.contributor.url | mustafa_albakri@unimap.edu.my | en_US |
dc.contributor.url | azmanbakir@ppinang.uitm.edu.my | en_US |
dc.contributor.url | mazlan547@ppinang.uitm.edu.my | en_US |
Appears in Collections: | Mohd Mustafa Al Bakri Abdullah, Prof. Dr. School of Materials Engineering (Articles) Center of Excellence for Geopolymer and Green Technology (CEGEOGTECH) (Articles) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Machining performance of reinforced alumina insert in end milling of AISI 1018 steel-abstract.pdf | 58.24 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.