Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/33590
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMiyachika, Kouitsu
dc.contributor.authorAndo, Kazuaki
dc.contributor.authorXue, Wei-Dong
dc.contributor.authorImaduddin Helmi, Wan Nordin
dc.date.accessioned2014-04-10T07:17:39Z
dc.date.available2014-04-10T07:17:39Z
dc.date.issued2009
dc.identifier.citationp. 295-304en_US
dc.identifier.isbn978-079184903-3
dc.identifier.urihttp://dspace.unimap.edu.my:80/dspace/handle/123456789/33590
dc.identifier.urihttp://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1650126
dc.descriptionProceedings of ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2009) at San Diego, CA, United States on 30 August 2009 through 2 September 2009.en_US
dc.description.abstractThis paper presents a study on effects of case depth, side-face carburizing and helix angle on the residual stress and the bending fatigue strength of case-carburized helical gears. The carbon content of each element of the FEM gear models due to carburizing was obtained. A heat conduction analysis and an elastic-plastic stress analysis in the case-carburizing process of helical gears were carried out by the three-dimensional finite-element method, and then residual stresses were obtained. Effects of the case depth, the side-face carburizing, the helix angle and the face width on the residual stress of case-carburized helical gears were determined. Bending fatigue tests were carried out for case-carburized helical gears and S-N curves and bending fatigue limit loads were obtained. Effects of the case-depth, the side-face carburizing and the helix angle on the bending fatigue strength of the case-carburized helical gear were determined.en_US
dc.language.isoenen_US
dc.publisherASMEen_US
dc.subjectCase depthen_US
dc.subjectSide-face carburizingen_US
dc.subjectHelix angleen_US
dc.subjectCarbonen_US
dc.subjectHeat conduction analysisen_US
dc.subjectElastic-plastic stressen_US
dc.subjectHelical gearsen_US
dc.subjectBending fatigueen_US
dc.titleEffects of case depth, side-face carburizing and helix angle on residual stress and bending fatigue strength of case-carburized helical gearsen_US
dc.typeWorking Paperen_US
dc.identifier.url10.1115/DETC2009-87313
dc.identifier.urlhttp://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1650126
dc.contributor.urlimaduddin@unimap.edu.myen_US
Appears in Collections:Imaduddin Helmi Wan Nordin



Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.