Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/3306
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNorasulaini Abdul Rahman-
dc.date.accessioned2008-11-24T06:47:14Z-
dc.date.available2008-11-24T06:47:14Z-
dc.date.issued2008-04-
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/3306-
dc.descriptionAccess is limited to UniMAP community.en_US
dc.description.abstractThe main objective of this study to investigate the effects of non-halogen flame retardant in high density polyethylene (HDPE) and observe their ignition properties. High density polyethylene (HDPE) was prepared with added non-halogen flame retardant and synergist in powder. HDPE with different recipe were mixed using Z-blade mixer in temperature 200°C and value of motor torque was 50 rpm. Synergist was added to improve miscibility of HDPE with antimony trioxide as a non-halogen flame retardant. However, the result from HDPE with different composition of non-halogen flame retardant and synergist almost same. The result from thermal analysis show non-halogen flame retardant and synergist has a higher melting temperature than HDPE. In combustion process non-halogen flame retardant did not produce a “char” and it did not dripping when burning. The flammability of blends determined by direct flame method because it approaching the UL 94. Overall, the studies showed that non-halogen flame retardant have a potential to develop in plastic industry because it is not harmful for environment.en_US
dc.language.isoenen_US
dc.publisherUniversiti Malaysia Perlisen_US
dc.subjectPolyethyleneen_US
dc.subjectFire resistant polymersen_US
dc.subjectFire resistant materialsen_US
dc.subjectFire resistant polymersen_US
dc.subjectFireproofing agentsen_US
dc.titleThe study of flame retardant non-halogen in High Density Polyethylene (HDPE)en_US
dc.typeLearning Objecten_US
dc.contributor.advisorMohd Nasir Zainal Arif, Prof. (Advisor)en_US
dc.publisher.departmentSchool of Materials Engineeringen_US
Appears in Collections:School of Materials Engineering (FYP)

Files in This Item:
File Description SizeFormat 
Referrences and Appendix.pdf425.52 kBAdobe PDFView/Open
Conclusion.pdf53.12 kBAdobe PDFView/Open
Results and discussion.pdf144.25 kBAdobe PDFView/Open
Methodology.pdf67.59 kBAdobe PDFView/Open
Literature review.pdf109.92 kBAdobe PDFView/Open
Introduction.pdf65.82 kBAdobe PDFView/Open
Abstract, Acknowledgement.pdf35.03 kBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.