Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/32788
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Mohd. Azaman, Md Deros | - |
dc.contributor.author | Mohd Sapuan, Salit, Prof. Ir. Dr. | - |
dc.contributor.author | Shamsuddin, Sulaiman, Prof. Dr. | - |
dc.contributor.author | Edi Syams, Zainudin, Prof. Madya Dr. | - |
dc.contributor.author | Khalina, Abdan | - |
dc.date.accessioned | 2014-03-17T06:56:39Z | - |
dc.date.available | 2014-03-17T06:56:39Z | - |
dc.date.issued | 2013-09 | - |
dc.identifier.citation | Materials and Design, vol. 50, 2013, pages 451-456 | en_US |
dc.identifier.issn | 0261-3069 | - |
dc.identifier.uri | http://www.sciencedirect.com/science/article/pii/S0261306913002367 | - |
dc.identifier.uri | http://dspace.unimap.edu.my:80/dspace/handle/123456789/32788 | - |
dc.description | Link to publisher's homepage at http://www.elsevier.com/ | en_US |
dc.description.abstract | Currently, many industries are trending towards producing products exhibit such properties as small thickness, lightweight, small dimensions, and environmental friendliness. In this project, flat or shallow thin-walled parts were designed to compare the advantages and disadvantages of lignocellulosic polymer composites (PP + 50. wt% wood) in terms of processability. This study focused on the filling, in-cavity residual stresses and warpage parameters associated with both types of thin-walled moulded parts. Thin-walled parts 0.7. mm in thickness were suitably moulded using lignocellulosic composite materials to determine the effects of filling. The analysis showed, the shallow thin-walled part is preferable in moulding lignocellulosic polymer composite material due to the low residual stress and warpage measured. The results also indicate that the shallow thin-walled part is structurally rigid, such that it can be used in applications involving small shell parts, and can be processed more economically using less material than the flat thin-walled part. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Elsevier B.V. | en_US |
dc.subject | Natural fibre reinforced polymers | en_US |
dc.subject | Shallow and flat thin-walled parts | en_US |
dc.subject | Injection moulding process | en_US |
dc.title | An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat thin-walled parts by injection moulding process | en_US |
dc.type | Article | en_US |
dc.contributor.url | azaman@unimap.edu.my | en_US |
dc.contributor.url | sapuan@eng.upm.edu.my | en_US |
dc.contributor.url | shamsuddin@upm.edu.my | en_US |
dc.contributor.url | edisyam@upm.edu.my | en_US |
dc.contributor.url | khalina@upm.edu.my | en_US |
Appears in Collections: | School of Manufacturing Engineering (Articles) Mohd Azaman Md Deros, Dr. |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat thin-walled parts by injection moulding process.pdf | 11.94 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.