Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/3275
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Meor Syazalee Sha @ Meor Sha | - |
dc.date.accessioned | 2008-11-17T09:01:51Z | - |
dc.date.available | 2008-11-17T09:01:51Z | - |
dc.date.issued | 2008-04 | - |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/3275 | - |
dc.description.abstract | Porcelain ceramic which composed of ball clay, kaolin, silica and feldspar were fabricated and investigated to study the effect of sintering temperature on mechanical properties. Two types of parameter were used in these projects which were different composition of raw material and sintering temperature. Three different compositions of raw materials were used which were composition A, B and C. The wet mixture then was sintered at 1200°C and 1300°C for 3 hours soaking time at 5°C/min for heating rate. The compression test and characterization of the sample such as the porosity, density, shrinkage and weight loss were carried out in order to determine the properties of the final product. The sample were also been analyzed using Scanning Electron Microscope (SEM) to capture the sample microstructure. From all experiment and testing, it is found that by increasing the sintering temperature, the compression strength, bulk density, and shrinkage were increased and at the same time reducing the percent of porosity of the porcelain ceramic. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis | en_US |
dc.subject | Porcelain | en_US |
dc.subject | Ceramics | en_US |
dc.subject | Porosity | en_US |
dc.subject | Ceramic materials | en_US |
dc.subject | Wet casting | en_US |
dc.title | The fabrication of porcelain ceramic via Wet casting technique | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Syed Nuzul Fadzli Syed Adam (Advisor) | en_US |
dc.publisher.department | School of Materials Engineering | en_US |
Appears in Collections: | School of Materials Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
References and appendix.pdf | 197.69 kB | Adobe PDF | View/Open | |
Conclusion.pdf | 70.84 kB | Adobe PDF | View/Open | |
Results and discussion.pdf | 1.62 MB | Adobe PDF | View/Open | |
Methodology.pdf | 226.79 kB | Adobe PDF | View/Open | |
Literature review.pdf | 86.12 kB | Adobe PDF | View/Open | |
Introduction.pdf | 82.62 kB | Adobe PDF | View/Open | |
Abstract, Acknowledgement.pdf | 104.91 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.