Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/32633
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Muhammad Rubai’ya, Ahmad Shukri | - |
dc.date.accessioned | 2014-03-12T08:51:31Z | - |
dc.date.available | 2014-03-12T08:51:31Z | - |
dc.date.issued | 2011-04 | - |
dc.identifier.uri | http://dspace.unimap.edu.my:80/dspace/handle/123456789/32633 | - |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | Wireless Power Line Tapper is a source of energy assistance to any switch. Most electronic components require a power supply to function, the normal power supply to receive power from the mains supply. The power supply is obtained by tapping the power of wireless. Wireless Power Line Tapper describes a power supply that produces an output direct current (DC). Cable across a power supply circuit is described with the winding ratio of 1 and is also known as primary winding. Next, the secondary winding is the power of this model. Secondary voltage from the secondary winding is induced if the secondary winding is close to the primary winding. Mutual Induction In theory, if two-loop coil of wire placed at a short distance causes the magnetic field produced at each other, so will the resulting voltage on the windings. Therefore, an isolated winding on ferromagnetic coil will have the burden of blocking the induction as alternating current. In the primary windings, it has high voltage and low current to the resulting low voltage high current in the secondary winding. Although the secondary winding has a winding ratio of 20 turns, but the voltage produced is still low in value. The purpose of the production project was to produce DC power supply modules that reduce the supply voltage of electricity supply. Connecting this circuit is rectifier circuit, where it will convert alternating current to direct current. This module acts as a power supply for any costs or output. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.subject | Energy assistance | en_US |
dc.subject | Direct current (DC) | en_US |
dc.subject | Power supply | en_US |
dc.title | Development of wireless line power tapper | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Abdul Rahim Abdul Razak | en_US |
dc.publisher.department | School of Electrical Systems Engineering | en_US |
Appears in Collections: | School of Electrical Systems Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Abstract, Acknowledgement.pdf | 116.31 kB | Adobe PDF | View/Open | |
Introduction.pdf | 101.15 kB | Adobe PDF | View/Open | |
Literature review.pdf | 503.35 kB | Adobe PDF | View/Open | |
Methodology.pdf | 110.95 kB | Adobe PDF | View/Open | |
Results and discussion.pdf | 207.96 kB | Adobe PDF | View/Open | |
Conclusion.pdf | 25.22 kB | Adobe PDF | View/Open | |
Reference and appendix.pdf | 803.52 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.