Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/30497
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNurul Husna, A. W.-
dc.contributor.authorSiti Fatimah, Siraj, Prof. Madya. Dr.-
dc.contributor.authorMohd Zaki, Ab. Muin, Prof. Dr.-
dc.date.accessioned2013-12-12T09:09:08Z-
dc.date.available2013-12-12T09:09:08Z-
dc.date.issued2012-06-18-
dc.identifier.citationp. 539 - 545en_US
dc.identifier.isbn978-967-5760-11-2-
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/30497-
dc.descriptionThe 2nd International Malaysia-Ireland Joint Symposium on Engineering, Science and Business 2012 (IMiEJS2012) jointly organized by Universiti Malaysia Perlis and Athlone Institute of Technology in collaboration with The Ministry of Higher Education (MOHE) Malaysia, Education Malaysia and Malaysia Postgraduates Student Association Ireland (MyPSI), 18th - 19th June 2012 at Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia.en_US
dc.description.abstractThis paper presents an implementation of open loop DC-DC boost converter. The operation of boost converter is considered to operate in continuous conduction mode (CCM) only. State-space averaging technique is applied to obtain the modeled equations of boost converter. The regulation of duty cycle is achieved by implementing a pulse width-modulated (PWM) technique at a fixed frequency of 100 kHz. By varying the value of load resistor, the efficiency of converter can be obtained. Modeling and simulation is initially carried out using Matlab/Simulink block diagram. An attempt has been made in this paper to model the continuous part of the converter so that it may be readily used to design Proportional-Integral-Derivative (PID) controller to improve the performance and percentage of efficiency of boost converter.en_US
dc.language.isoenen_US
dc.publisherUniversiti Malaysia Perlis (UniMAP)en_US
dc.relation.ispartofseriesProceedings of the The 2nd International Malaysia-Ireland Joint Symposium on Engineering, Science and Business 2012 (IMiEJS2012);-
dc.subjectDC-DC boost converteren_US
dc.subjectContinuous conduction mode (CCM)en_US
dc.subjectState space averaging techniqueen_US
dc.subjectPulse width-modulated (PWM)en_US
dc.subjectMatlab/Simulinken_US
dc.subjectProportional-Integral-Derivative (PID)en_US
dc.titleStudy of load variations against the efficiency of DC-DC boost converteren_US
dc.typeWorking Paperen_US
dc.contributor.urlhusna@ieee.orgen_US
dc.contributor.urlfatimah@unimap.edu.myen_US
dc.contributor.urlzakimuin@unimap.edu.myen_US
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
pg 539 - 545.pdfAccess is limited to UniMAP community214.42 kBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.