1. UniMAP Library Digital Repository
  2. The Library
  3. Conference Papers
Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/29002
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAhmad Humaizi, Hilmi-
dc.contributor.authorNorazman, M. Nor, Lt. Kol. Ir. Dr.-
dc.contributor.authorAriffin, Ismail-
dc.contributor.authorMohammed Alias, Yusof-
dc.contributor.authorAhmad Mujahid, Ahmad Zaidi-
dc.contributor.authorShohaimi, Abdullah, Brig. Jen. Prof. Madya Dr.-
dc.date.accessioned2013-10-21T04:20:49Z-
dc.date.available2013-10-21T04:20:49Z-
dc.date.issued2012-06-18-
dc.identifier.citationp. 728 - 732en_US
dc.identifier.isbn978-967-5760-11-2-
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/29002-
dc.descriptionThe 2nd International Malaysia-Ireland Joint Symposium on Engineering, Science and Business 2012 (IMiEJS2012) jointly organized by Universiti Malaysia Perlis and Athlone Institute of Technology in collaboration with The Ministry of Higher Education (MOHE) Malaysia, Education Malaysia and Malaysia Postgraduates Student Association Ireland (MyPSI), 18th - 19th June 2012 at Putra World Trade Center (PWTC), Kuala Lumpur, Malaysia.en_US
dc.description.abstractWater is able to cut certain thickness of metal plates if given enough pressure. To prove it, a blast test jig is design and fabricated. The design of the blast test jig is optimized using AUTODYN blast simulation software. The blast test jig consists of three parts that is blast cap, water container and workpiece holder. 10 grams of PE4 explosive was used in the experiment. The PE4 explosive was exploded inside a hollow chamber inside the blast cap. The blast wave pushes the water to cut 5 mm thick Aluminum plate and 2 mm thick stainless steel plate.en_US
dc.language.isoenen_US
dc.publisherUniversiti Malaysia Perlis (UniMAP)en_US
dc.relation.ispartofseriesProceedings of the The 2nd International Malaysia-Ireland Joint Symposium on Engineering, Science and Business 2012 (IMiEJS2012);-
dc.subjectAUTODYNen_US
dc.subjectPE4en_US
dc.subjectExplosionen_US
dc.subjectRectangular nozzleen_US
dc.subjectWateren_US
dc.titleDesign and fabrication of blast test jig for experiment to push water through a rectangular nozzle using explosionen_US
dc.typeWorking Paperen_US
dc.contributor.urlhumaizi@unimap.edu.myen_US
dc.contributor.urlazman@upnm.edu.myen_US
dc.contributor.urlariffin@upnm.edu.myen_US
dc.contributor.urlalias@upnm.edu.myen_US
dc.contributor.urlmujahid@upnm.edu.myen_US
dc.contributor.urlshohaimi@upnm.edu.myen_US
Appears in Collections:Conference Papers

Files in This Item:
File Description SizeFormat 
pg 728 - 732.pdfAccess is limited to UniMAP community253.96 kBAdobe PDFView/Open
Show simple item record


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.