Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/28683
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Haris, Ab. Halim | - |
dc.date.accessioned | 2013-10-09T05:09:50Z | - |
dc.date.available | 2013-10-09T05:09:50Z | - |
dc.date.issued | 2010-05 | - |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/28683 | - |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | The commonly problem for milled product is quality of surface roughness. Therefore, the important step is with choice the correct cutting parameter to get the result or to obtain desired surface finish. This project was conducted using Taguchi method for the purpose of obtaining the optimum cutting parameters in CNC milling. This milling process will be carrying using CNC Milling process, Spinner (Brand), VC810 (Model). The cutting parameters of this experiment have been chosen including type of cutting tool, cutting speed (rpm), feed rate (mm/tooth) and depth of cut (mm). The material used in this milling process is aluminium. The Design of Experiment (DOE) technique is used to analyze every parameter data with using Taguchi method and have done 9 differential of cutting parameters. This is the purpose for analyzing the cutting surface and to obtain the optimum surface roughness. The optimum parameters were proven based on the prediction by Design Expert software and also experimental run. The parameters were cutting tool type is high speed steel (TiCN coated) [A2], cutting speed = 700 rpm [B1], feed rate 0.1 mm/tooth [C1] and depth of cut 0.5 mm [D1]. In conclusion, the objectives of this project to obtain the optimum cutting parameters for optimum surface roughness were achieved. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.subject | CNC milling process | en_US |
dc.subject | Cutting parameters | en_US |
dc.subject | Design of Experiment (DOE) | en_US |
dc.subject | Aluminium | en_US |
dc.title | A study on surface roughness of aluminium using CNC milling process | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Muhamad Nasir Murad | en_US |
dc.publisher.department | School of Manufacturing Engineering | en_US |
Appears in Collections: | School of Manufacturing Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Abstract, Acknowledgement.pdf | 75.51 kB | Adobe PDF | View/Open | |
Introduction.pdf | 45.67 kB | Adobe PDF | View/Open | |
Literature review.pdf | 395.46 kB | Adobe PDF | View/Open | |
Methodology.pdf | 581.39 kB | Adobe PDF | View/Open | |
Results and discussion.pdf | 173.03 kB | Adobe PDF | View/Open | |
Conclusion.pdf | 46.21 kB | Adobe PDF | View/Open | |
Reference and appendix.pdf | 46.13 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.