Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/2577
Full metadata record
DC FieldValueLanguage
dc.contributor.authorIsmail, Daut
dc.contributor.authorDina Maizana, Maiz Ahmad
dc.contributor.authorShuhaimi, Zakaria
dc.contributor.authorS. Uthman
dc.contributor.authorSoib, Taib
dc.date.accessioned2008-10-22T08:18:56Z
dc.date.available2008-10-22T08:18:56Z
dc.date.issued2007-12-06
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/2577
dc.descriptionOrganized by The Malaysian Research Group (MRG), 19th - 21st December 2007 at University of Salford, United Kingdom.en_US
dc.description.abstractThis paper describe the result of an investigation on the effect of different stack of core lamination in the two of 3 phase distribution transformer 1000kVA. The investigation involves the variation of power loss, building factor, the third harmonic of voltage and flux leakages. The power loss and flux distribution have been measured using no load test in two types of model setting of core built from the same size and type of M5 (CGO) grades material of laminations. And the loss of the transformer core with regular stack is 6.55% better than the loss of the transformer core with irregular stack at 1.7T, 50 Hz. The flux leakage at the corner joint in the core with regular stack of lamination is lower than the two of the transformer core, over the whole flux density range. The total harmonic distortation of flux is smaller in the transformer core with regular stack of lamination and larger in the transformer core with irregular stack of lamination. Using regular stack of lamination in transformer core is more efficient than two types of stack of transformer core lamination.en_US
dc.language.isoenen_US
dc.publisherThe Malaysian Research Group (MRG)en_US
dc.relation.ispartofseriesThe Malaysian Research Group - International Conference 2007 (MRG-IC 2007)en_US
dc.subjectTransformer coreen_US
dc.subjectFlux distributionen_US
dc.subjectPower lossen_US
dc.subjectTransformersen_US
dc.titleComparison on losses and flux distribution between two of 3 phase distribution transformer 1000kVA assembled with regular and irregular stack of transformer core laminationen_US
dc.typeWorking Paperen_US
Appears in Collections:Conference Papers
Ismail Daut, Prof. Dr.



Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.