Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/2341
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Mohamad Tarmizi Ibrahim | - |
dc.date.accessioned | 2008-10-08T02:59:29Z | - |
dc.date.available | 2008-10-08T02:59:29Z | - |
dc.date.issued | 2008-04 | - |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/2341 | - |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | The purpose of this project are to optimize process variables of WEDM to obtain minimum surface roughness and crater size. This research is to get the best cutting parameter for tensile testing where the quality on tensile sample more critical factor to consider. This research is started with collecting the information from literature review regarding stainless steel (SKD11) Wire electrical discharge machining (WEDM) and design of experiment (DOE). Then, the parameters will be selected based on the experiment. The material used in this project is stainless steel (1.5C-12Cr-Mo-0.35V). Parameter used in this research is Electrolysis Free, Time ON, Time OFF, Flushing Rate, Peak Current, Voltage, Wire Pressure and Wire Speed has been study. Design of Experiment (DOE) was utilized to find the best combination of the parameters setting to achieve the minimum surface roughness and crater size. Based on the result of analysis by using DOE software, the confirmation tests have been done. After the confirmation process done, we are able to see the percentage of error on the predicted value using DOE software and the confirmation actual value. The results on surface roughness the crater size have been discussed. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis | en_US |
dc.subject | Stainless steel | en_US |
dc.subject | Steel, Stainless | en_US |
dc.subject | Surface roughness | en_US |
dc.subject | Wire Electrical Discharge Machining | en_US |
dc.subject | Materials -- Testing | en_US |
dc.subject | Strength of materials | en_US |
dc.title | Optimization effect of parameter on surface quality of stainless steel | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Azaman Md. Deros (Advisor) | en_US |
dc.publisher.department | School of Manufacturing Engineering | en_US |
Appears in Collections: | School of Manufacturing Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Abstract, Acknowledgment.pdf | 75.39 kB | Adobe PDF | View/Open | |
Conclusion.pdf | 67.61 kB | Adobe PDF | View/Open | |
Introduction.pdf | 114.66 kB | Adobe PDF | View/Open | |
Literature review.pdf | 350.52 kB | Adobe PDF | View/Open | |
Methodology.pdf | 826.88 kB | Adobe PDF | View/Open | |
References and appendix.pdf | 3.58 MB | Adobe PDF | View/Open | |
Results and discussion.pdf | 819.7 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.