Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/21570
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Mohd Hafidz, Norizaman | - |
dc.contributor.author | Bhuvenesh, Rajamony, Assoc. Prof. Dr. | - |
dc.date.accessioned | 2012-10-30T04:22:34Z | - |
dc.date.available | 2012-10-30T04:22:34Z | - |
dc.date.issued | 2010-10-16 | - |
dc.identifier.isbn | 978-967-5760-03-7 | - |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/21570 | - |
dc.description | International Postgraduate Conference On Engineering (IPCE 2010), 16th - 17th October 2010 organized by Centre for Graduate Studies, Universiti Malaysia Perlis (UniMAP) at School of Mechatronic Engineering, Pauh Putra Campus, Perlis, Malaysia | en_US |
dc.description.abstract | Advance machining such as Plasma Arc Cutting machine to cut common engineering material was very limited in the industry. The main problem was due to little knowledge and experiences to handle the machine and also less exposure regarding advance material cutting. The author used Selco Genesis 90 Plasma Arc Cutting machine to cut Stainless Steels (3 and 6 mm), Aluminums (3 and 6 mm) and Mild Steels (3 and 6 mm) in this study. The usage of Taguchi approach Design of Experiments from the designing steps until the analyzing phase from the experiment was used with Design of Experiment L-9 layout as preferences. Parameters determined by the author were the Air Pressure [bar], Current Flow Rate [A], Cutting Speed [mm/min] and Arc Gap [mm]. These parameters used to analyze the setting required for optimizing the process variables for Plasma Arc Cutting machine to gain the best combination. The effects of these factors were the calculation of Material Removal Rate (MRR), and Surface Roughness (Ra). | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis (UniMAP) | en_US |
dc.relation.ispartofseries | Proceedings of the International Postgraduate Conference on Engineering (IPCE 2010) | en_US |
dc.subject | Plasma Arc Cutting | en_US |
dc.subject | Engineering material | en_US |
dc.subject | Taguchi method | en_US |
dc.title | Investigation of the effects of plasma arc parameters on the machining of different engineering materials | en_US |
dc.type | Working Paper | en_US |
dc.publisher.department | Centre for Graduate Studies | en_US |
dc.contributor.url | hafidznorizaman@gmail.com | en_US |
Appears in Collections: | Conference Papers |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
E03 M. Hafidz Norizaman.pdf | 713.11 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.