Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/20981
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Mohd Zulhelmie, Zainal Abidin | - |
dc.date.accessioned | 2012-09-22T07:26:41Z | - |
dc.date.available | 2012-09-22T07:26:41Z | - |
dc.date.issued | 2009-04 | - |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/20981 | - |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | A screw also known as fastener is used to connect two or more the various parts of an assembly together. This study focuses on bending analysis of screw thread connection with nut having size M12 for the application at road barrier stand .Analytical method of finite element was used in this analysis through CATIA's software. The suitable mesh found from the convergence study was 0.5mm, and then the value was in the analysis to seek out bending stress in the screw thread connections with nut that are normally used at road barrier stands. From the analysis result, bending stress equal to 2.41x108N/m2 occurred at the connections with maximum load equal to 240 Newton. Then the improvement design of the screw thread connection had been made to reduce stress that happened at angle between thread. Result from improvement design of screw thread connections, shows that the stress value obtained is 2.37x108 N/m2 with the same load applied. In conclusion the bending stress at screw thread connection is reduced after improvement of the design has been done. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis | en_US |
dc.subject | Screw | en_US |
dc.subject | Screw thread connection | en_US |
dc.subject | Nut | en_US |
dc.subject | Road barrier stand | en_US |
dc.subject | Finite element analysis | en_US |
dc.title | Finite element analysis of screw threaded connections under bending | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Muhamad Sailfuldin Abdul Manan, Dr. | en_US |
dc.publisher.department | School of Manufacturing Engineering | en_US |
Appears in Collections: | School of Manufacturing Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Abstract, acknowledgement.pdf | 141.42 kB | Adobe PDF | View/Open | |
Conclusion.pdf | 101.05 kB | Adobe PDF | View/Open | |
Introduction.pdf | 298 kB | Adobe PDF | View/Open | |
Literature review.pdf | 642.05 kB | Adobe PDF | View/Open | |
Methodology.pdf | 474.37 kB | Adobe PDF | View/Open | |
Reference and appendix.pdf | 196.13 kB | Adobe PDF | View/Open | |
Result and discussion.pdf | 607.58 kB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.