Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/13580
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Mas Fawzi, Mohd Ali | - |
dc.contributor.author | Azhar, Abdul Aziz | - |
dc.date.accessioned | 2011-08-22T02:56:37Z | - |
dc.date.available | 2011-08-22T02:56:37Z | - |
dc.date.issued | 2007-09 | - |
dc.identifier.citation | The Journal of the Institution of Engineers, Malaysia, vol. 68(3), 2007, pages 27-32 | en_US |
dc.identifier.issn | 0126-513X | - |
dc.identifier.uri | http://myiem.org.my/content/iem_journal_2007-178.aspx | - |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/13580 | - |
dc.description | Link to publisher's homepage at http://www.myiem.org.my/ | en_US |
dc.description.abstract | Gasoline direct injection requires atomisers that are able to comply with stringent requirements in terms of spray structure and mean droplet size. Internal geometrical characteristics of an atomizer play an important role in producing the required spray quality. This paper investigates spray formation and outcome of a pressure-swirl type atomiser with several internal geometrical characteristic configurations using commercially available computational fluid dynamics codes. Both steady and unsteady flow of the spray formation from inside of the final orifice to a few millimeters downstream the nozzle with three different shapes of needle tips as well as two swirl intensities were investigated at fuel-air pressure differential from 3.0 to 10.0 MPa. The calculations took the advantages of fast and low computing cost by applying 2D-axisymmetric swirl solver together with multiphase Eulerian volume of fluid technique. The calculated data were validated by comparing measured static mass flow rate of an actual pressure-swirl atomizer at several fuel-air pressure differentials. Data from the calculations such as mass flow rate, spray cone angle, and liquid sheet thickness at nozzle exit were used to calculate the resultant droplet Sauter mean diameter using a known empirical correlation. Results from the calculations suggest that relatively high fuel-air pressure differential, lower discharge coefficient, stronger swirl intensity, thinner liquid film, and larger spray cone angle produce smaller droplet Sauter mean diameter. | en_US |
dc.language.iso | en | en_US |
dc.publisher | The Institution of Engineers, Malaysia | en_US |
dc.subject | Computational Fluid Dynamics (CFD) | en_US |
dc.subject | Gasoline Direct Injection (GDI) | en_US |
dc.subject | Liquid sheet thickness | en_US |
dc.subject | Multiphase flow | en_US |
dc.subject | Pressure-swirl atomizers | en_US |
dc.subject | Sauter Mean Diameter (SMD) | en_US |
dc.subject | Spray angle | en_US |
dc.title | Flow effect due to geometrical characteristics of pressure-swirl GDI atomizers | en_US |
dc.type | Article | en_US |
dc.contributor.url | fawzi@uthm.edu.my | en_US |
dc.contributor.url | azhar@fkm.utm.my | en_US |
Appears in Collections: | IEM Journal |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
027-032_Flow Effect 4pp.pdf | 1.13 MB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.